축에 평행하지 않은 직선을 회전축으로 하는 회전체를 매개변수로 나타내세요. 먼저 회전시키는 평면이 그 축에 수직임을 보이는 것이 좋을 수 있습니다.
(a) 평면 위에 있고 중심이 이며 반지름이 1인 원의 매개변수 방정식을 구하세요. (b) (a)의 원을 직선 를 축으로 회전시켜 만들어지는 곡면의 매개변수 방정식을 구하세요.

영어 원문 보기
Parametrize a solid of rotation about a line not parallel to an axis. Maybe first show that the plane you're rotating is normal to that axis.
(a) Give a parametric equation for the circle of radius 1, centred at , lying in the plane . (b) Give a parametrized equation for the surface formed by rotating the circle from part (a) about the line .

정답·풀이 보기
(a) 아래 그림에서 점 는 중심 에서 방향으로 단위, 방향으로 단위만큼 벗어나 있다. 따라서 이다.

따라서 이 원을 에서 로 매개변수화할 수 있다.
참고: 이 방정식이 우리가 원하는 두 가지 성질을 만족함은 쉽게 확인할 수 있다. 좌표와 좌표가 같으므로 평면 위에 있다. 중심이 인 원임을 확인하기 위해, 에서 까지의 거리를 구하면 다음과 같다.
따라서 모든 점이 같은 한 점으로부터 거리가 1이다. 즉, 이 점들은 반지름이 1인 원 위에 있다.
(b) 점 를 직선 를 축으로 라디안만큼 회전시키는 경우를 생각한다.

회전한 점의 높이는 로 그대로이다. 직선 까지의 거리도 변하지 않는다: .
원 위의 점 가 그리는 원은 중심이 이고 반지름이 이므로, 그 방정식은 , , 이다.
원본 교재 풀이(영어)
(a) In the sketch below, the point deviates from the centre by units in the direction, and by units in the direction. So, .

So, we can parametrize the circle as , with .
Remark: it's easy to check that this equation satisfies the two properties we desire. Since the - and coordinates match, it's in the plane . To check that it's a circle centred at , we note the distance from to is:
So, our points all have distance one from the same point — that is, they lie on a circle of radius 1.
(b) Consider a point , rotating radians about the line .

The new position of the point has the same height, . Its distance from the line is also preserved: .
The circle traced out by a point on the circle is centred at with radius , so it has equation , , .