제1사분면에서 곡선 과 x축 사이에 있는 영역의 넓이를 구하세요.
영어 원문 보기
Find the area of the region in the first quadrant between the curve and the x-axis.
원본 교재에 이 문제의 정답은 실려 있지 않습니다.
한 번 더 — 비슷한 문제 풀기CLP-2 · 1.12절 · 25번문제 은행 · 미적분 · 대학 미적분 · 적분 기법
무한 구간이나 함숫값이 무한대가 되는 점이 있는 적분의 수렴·발산을 판정한다
유형·난이도는 우리말 풀이가 붙은 문제는 선생님이 정했고, 나머지는 자동 분류라 다를 수 있어요. 난이도가 정해지지 않은 문제는 난이도로 거를 때 빠집니다.
6문제 · 1 / 1쪽
제1사분면에서 곡선 과 x축 사이에 있는 영역의 넓이를 구하세요.
Find the area of the region in the first quadrant between the curve and the x-axis.
원본 교재에 이 문제의 정답은 실려 있지 않습니다.
한 번 더 — 비슷한 문제 풀기CLP-2 · 1.12절 · 25번곡선 x축, 그리고 왼쪽에서 로 유계인 영역의 넓이를 구하세요.
Find the area of the region bounded by the curve the x-axis, and on the left by
곡선 아래에서 부터 까지의 영역을 x축을 중심으로 회전시켜 생기는 회전체의 부피를 구하세요.
Find the volume of the solid generated by revolving about the x-axis the region under the curve from to
원본 교재에 이 문제의 정답은 실려 있지 않습니다.
한 번 더 — 비슷한 문제 풀기OpenStax 2권 · 3.7절 · 53번제1사분면에서 곡선 아래의 영역을 y축을 중심으로 회전시켜 생기는 회전체의 부피를 구하세요.
Find the volume of the solid generated by revolving about the y-axis the region under the curve in the first quadrant.
1사분면에서 곡선 아래의 영역을 x축을 중심으로 회전시켜 생기는 회전체의 부피를 구하세요.
Find the volume of the solid generated by revolving about the x-axis the area under the curve in the first quadrant.
원본 교재에 이 문제의 정답은 실려 있지 않습니다.
한 번 더 — 비슷한 문제 풀기OpenStax 2권 · 3.7절 · 35번를 개의 같은 길이의 부분구간으로 나눈 의 중점 규칙 근삿값이라 하자. 와 의 차가 이하가 되도록 하는 의 값과 의 값을 구하세요. 중점 규칙을 개의 부분구간으로 사용할 때 생기는 오차 은 다음을 만족함을 기억하세요.
여기서 은 피적분함수의 이계도함수의 절댓값의 최댓값이고, 와 는 적분 구간의 양 끝점이다.
Let be the Midpoint Rule approximation for with equal subintervals. Find a value of and a value of such that differs from by at most . Recall that the error introduced when the Midpoint Rule is used with subintervals obeys
where is the maximum absolute value of the second derivative of the integrand and and are the end points of the interval of integration.
오차의 원인은 두 가지이다. 하나는 위끝이 무한대가 아니라 라는 것이고, 다른 하나는 유한한 개수 의 구간으로 근사한다는 것이다. 먼저 오차가 이하가 되도록 하는 의 값을 찾는다. 즉 이 되는 를 찾는다. 그 다음에 를 이내로 근사하는 의 값을 찾는다. 그러면 전체 오차는 최대 이 되어 원하는 결과를 얻는다. (오차를 과 이 아닌 다른 방식으로 나눌 수도 있다. 이렇게 하면 가능한 여러 답 중 하나를 얻게 된다.)
이 되는 를 찾자. 모든 에 대해 이므로
예를 들어 으로 택한다.
이제 를 근사하는 데 사용할 구간의 개수를 정하자. 이번에도 오차가 보다 작아야 한다. 오차의 한계를 구하려면 의 이계도함수를 알아야 한다.
는 양수이고 가 증가하면 감소하므로
이고, 다음이 성립하면 이다.
따라서 , 로 하면 된다. 이 밖에도 옳은 답이 많이 있다.
There are two sources of error: the upper bound is , rather than infinity, and we're using an approximation with some finite number of intervals, . Our plan is to first find a value of that introduces an error of no more than . That is, we'll find a value of such that . After that, we'll find a value of that approximates to within . Then, all together, our error will be at most , as desired. (Note we could have broken up the error in another way—it didn't have to be and . This will give us one of many possible answers.)
Let's find a such that . For all , , so
Choose, for example, .
Now it's time to decide how many intervals we're going to use to approximate . Again, we want our error to be less than . To bound our error, we need to know the second derivative of .
Since is positive, and decreases as increases,
and if
So and will do the job. There are many other correct answers.