문제 은행 · 미적분 · 대학 미적분 · 다변수 미분

극값과 안장점

임계점을 찾고 이계도함수 판정법으로 극대·극소·안장점을 가린다

유형·난이도는 우리말 풀이가 붙은 문제는 선생님이 정했고, 나머지는 자동 분류라 다를 수 있어요. 난이도가 정해지지 않은 문제는 난이도로 거를 때 빠집니다.

48문제 · 2 / 3쪽

21.APEX · 12.8절 · 9번대학 수준우리말 번역

연습문제 7–12에서 함수 z=f(x,y)z=f(x,y), x=g(t)x=g(t), y=h(t)y=h(t) 가 주어져 있다.

(a) 다변수 연쇄 법칙을 사용하여 dzdt\displaystyle \frac{dz}{dt} 를 구하세요. (b) 주어진 tt 의 값에서 dzdt\displaystyle \frac{dz}{dt} 의 값을 구하세요.

z=5x+2y\displaystyle z=5x+2y, x=2cos⁡t+1x=2\cos t+1, y=sin⁡t−3y=\sin t-3; t=π/4t=\pi/4

영어 원문 보기

In Exercises 7–12, functions z=f(x,y)z=f(x,y), x=g(t)x=g(t) and y=h(t)y=h(t) are given.

(a) Use the Multivariable Chain Rule to compute dzdt\displaystyle \frac{dz}{dt}. (b) Evaluate dzdt\displaystyle \frac{dz}{dt} at the indicated tt-value.

z=5x+2y\displaystyle z=5x+2y, x=2cos⁡t+1x=2\cos t+1, y=sin⁡t−3y=\sin t-3; t=π/4t=\pi/4

정답·풀이 보기

(a) dzdt=5(−2sin⁡t)+2(cos⁡t)=−10sin⁡t+2cos⁡t\frac{dz}{dt} = 5(-2\sin t)+2(\cos t) = -10\sin t+2\cos t (b) At t=π/4t=\pi/4, dzdt=−42\frac{dz}{dt} = -4\sqrt{2}.

원본 교재 풀이(영어)

(a) dzdt=5(−2sin⁡t)+2(cos⁡t)=−10sin⁡t+2cos⁡t\frac{dz}{dt} = 5(-2\sin t)+2(\cos t) = -10\sin t+2\cos t (b) At t=π/4t=\pi/4, dzdt=−42\frac{dz}{dt} = -4\sqrt{2}.

한 번 더 — 비슷한 문제 풀기OpenStax 3권 · 4.7절 · 40번
# 극값과 안장점계산자동 분류
APEX Calculus V5 CC BY-NC 4.0우리말 번역: 빌드라인 스쿨 — AI 번역·자동 검토(원문과 같은 조건)
22.APEX · 12.8절 · 10번대학 수준우리말 번역

7–12번 문제에서 함수 z=f(x,y)z=f(x,y), x=g(t)x=g(t), y=h(t)y=h(t) 가 주어져 있다.

(a) 다변수 연쇄 법칙을 이용하여 dzdt\displaystyle \frac{dz}{dt} 를 계산하세요. (b) 주어진 tt 의 값에서 dzdt\displaystyle \frac{dz}{dt} 의 값을 구하세요.

z=xy2+1\displaystyle z=\frac{x}{y^2+1}, x=cos⁡tx=\cos t, y=sin⁡ty=\sin t; t=π/2t=\pi/2

영어 원문 보기

In Exercises 7–12, functions z=f(x,y)z=f(x,y), x=g(t)x=g(t) and y=h(t)y=h(t) are given.

(a) Use the Multivariable Chain Rule to compute dzdt\displaystyle \frac{dz}{dt}. (b) Evaluate dzdt\displaystyle \frac{dz}{dt} at the indicated tt-value.

z=xy2+1\displaystyle z=\frac{x}{y^2+1}, x=cos⁡tx=\cos t, y=sin⁡ty=\sin t; t=π/2t=\pi/2

정답·풀이 보기

(a) dzdt=11+y2(−sin⁡t)−2xy(y2+1)2(cos⁡t)\displaystyle \frac{dz}{dt} = \frac{1}{1+y^2}(-\sin t)-\frac{2xy}{(y^2+1)^2}(\cos t) 이다. (b) t=π/2t=\pi/2 일 때 x=0x=0, y=1y=1 이고 dzdt=−1/2\frac{dz}{dt} = -1/2 이다.

원본 교재 풀이(영어)

(a) dzdt=11+y2(−sin⁡t)−2xy(y2+1)2(cos⁡t)\displaystyle \frac{dz}{dt} = \frac{1}{1+y^2}(-\sin t)-\frac{2xy}{(y^2+1)^2}(\cos t). (b) At t=π/2t=\pi/2, x=0x=0, y=1y=1, and dzdt=−1/2\frac{dz}{dt} = -1/2.

한 번 더 — 비슷한 문제 풀기APEX · 12.8절 · 6번
# 극값과 안장점계산자동 분류
APEX Calculus V5 CC BY-NC 4.0우리말 번역: 빌드라인 스쿨 — AI 번역·자동 검토(원문과 같은 조건)
23.APEX · 12.8절 · 11번대학 수준우리말 번역

7–12번 문제에서 함수 z=f(x,y)z=f(x,y), x=g(t)x=g(t), y=h(t)y=h(t) 가 주어져 있다.

(a) 다변수 연쇄 법칙을 이용하여 dzdt\displaystyle \frac{dz}{dt} 를 계산하세요. (b) 주어진 tt 의 값에서 dzdt\displaystyle \frac{dz}{dt} 의 값을 구하세요.

z=x2+2y2\displaystyle z=x^2+2y^2, x=sin⁡tx=\sin t, y=3sin⁡ty=3\sin t; t=π/4t=\pi/4

영어 원문 보기

In Exercises 7–12, functions z=f(x,y)z=f(x,y), x=g(t)x=g(t) and y=h(t)y=h(t) are given.

(a) Use the Multivariable Chain Rule to compute dzdt\displaystyle \frac{dz}{dt}. (b) Evaluate dzdt\displaystyle \frac{dz}{dt} at the indicated tt-value.

z=x2+2y2\displaystyle z=x^2+2y^2, x=sin⁡tx=\sin t, y=3sin⁡ty=3\sin t; t=π/4t=\pi/4

정답·풀이 보기

(a) dzdt=2x(cos⁡t)+4y(3cos⁡t)\displaystyle \frac{dz}{dt} = 2x(\cos t) + 4y(3\cos t) 이다. (b) t=π/4t=\pi/4 일 때 x=2/2x=\sqrt{2}/2, y=32/2y=3\sqrt{2}/2 이고 dzdt=19\frac{dz}{dt} = 19 이다.

원본 교재 풀이(영어)

(a) dzdt=2x(cos⁡t)+4y(3cos⁡t)\displaystyle \frac{dz}{dt} = 2x(\cos t) + 4y(3\cos t). (b) At t=π/4t=\pi/4, x=2/2x=\sqrt{2}/2, y=32/2y=3\sqrt{2}/2, and dzdt=19\frac{dz}{dt} = 19.

한 번 더 — 비슷한 문제 풀기CLP-3 · 2.9절 · 22번
# 극값과 안장점계산자동 분류
APEX Calculus V5 CC BY-NC 4.0우리말 번역: 빌드라인 스쿨 — AI 번역·자동 검토(원문과 같은 조건)
24.APEX · 12.8절 · 12번대학 수준우리말 번역

7–12번 문제에서 함수 z=f(x,y)z=f(x,y), x=g(t)x=g(t), y=h(t)y=h(t) 가 주어져 있다.

(a) 다변수 연쇄 법칙을 이용하여 dzdt\displaystyle \frac{dz}{dt} 를 계산하세요. (b) 주어진 tt 의 값에서 dzdt\displaystyle \frac{dz}{dt} 의 값을 구하세요.

z=cos⁡xsin⁡yz=\cos x\sin y, x=πtx=\pi t, y=2πt+π/2y=2\pi t+\pi/2; t=3t=3

영어 원문 보기

In Exercises 7–12, functions z=f(x,y)z=f(x,y), x=g(t)x=g(t) and y=h(t)y=h(t) are given.

(a) Use the Multivariable Chain Rule to compute dzdt\displaystyle \frac{dz}{dt}. (b) Evaluate dzdt\displaystyle \frac{dz}{dt} at the indicated tt-value.

z=cos⁡xsin⁡yz=\cos x\sin y, x=πtx=\pi t, y=2πt+π/2y=2\pi t+\pi/2; t=3t=3

정답·풀이 보기

(a) dzdt=−sin⁡xsin⁡y(π)+cos⁡xcos⁡y(2π)\frac{dz}{dt} = -\sin x\sin y(\pi) + \cos x\cos y(2\pi) 이다. (b) t=3t=3 일 때 x=3πx=3\pi, y=13π/2y=13\pi/2 이고 dzdt=0\frac{dz}{dt} = 0 이다.

원본 교재 풀이(영어)

(a) dzdt=−sin⁡xsin⁡y(π)+cos⁡xcos⁡y(2π)\frac{dz}{dt} = -\sin x\sin y(\pi) + \cos x\cos y(2\pi). (b) At t=3t=3, x=3πx=3\pi, y=13π/2y=13\pi/2, and dzdt=0\frac{dz}{dt} = 0.

한 번 더 — 비슷한 문제 풀기OpenStax 3권 · 4.7절 · 44번
# 극값과 안장점계산자동 분류
APEX Calculus V5 CC BY-NC 4.0우리말 번역: 빌드라인 스쿨 — AI 번역·자동 검토(원문과 같은 조건)
25.APEX · 12.8절 · 19번대학 수준우리말 번역

19–22번 문제에서 함수 z=f(x,y)z=f(x,y), x=g(s,t)x=g(s,t), y=h(s,t)y=h(s,t) 가 주어져 있다.

(a) 다변수 연쇄 법칙을 이용하여 ∂z∂s\displaystyle \frac{\partial z}{\partial s} 와 ∂z∂t\displaystyle \frac{\partial z}{\partial t} 를 계산하세요. (b) 주어진 ss, tt 의 값에서 ∂z∂s\displaystyle \frac{\partial z}{\partial s} 와 ∂z∂t\displaystyle \frac{\partial z}{\partial t} 의 값을 구하세요.

z=x2y\displaystyle z=x^2y, x=s−tx=s-t, y=2s+4ty=2s+4t; s=1s=1, t=0t=0

영어 원문 보기

In Exercises 19–22, functions z=f(x,y)z=f(x,y), x=g(s,t)x=g(s,t) and y=h(s,t)y=h(s,t) are given.

(a) Use the Multivariable Chain Rule to compute ∂z∂s\displaystyle \frac{\partial z}{\partial s} and ∂z∂t\displaystyle \frac{\partial z}{\partial t}. (b) Evaluate ∂z∂s\displaystyle \frac{\partial z}{\partial s} and ∂z∂t\displaystyle \frac{\partial z}{\partial t} at the indicated ss and tt values.

z=x2y\displaystyle z=x^2y, x=s−tx=s-t, y=2s+4ty=2s+4t; s=1s=1, t=0t=0

정답·풀이 보기

(a) ∂z∂s=2xy(1)+x2(2)=2xy+2x2\frac{\partial z}{\partial s} = 2xy(1) + x^2(2) = 2xy+2x^2;

∂z∂t=2xy(−1)+x2(4)=−2xy+4x2\frac{\partial z}{\partial t} = 2xy(-1) + x^2(4) = -2xy+4x^2 (b) s=1s=1, t=0t=0 일 때 x=1x=1 이고 y=2y=2 이다. 따라서 ∂z∂s=6\frac{\partial z}{\partial s} = 6 이고 ∂z∂t=0\frac{\partial z}{\partial t} = 0 이다.

원본 교재 풀이(영어)

(a) ∂z∂s=2xy(1)+x2(2)=2xy+2x2\frac{\partial z}{\partial s} = 2xy(1) + x^2(2) = 2xy+2x^2;

∂z∂t=2xy(−1)+x2(4)=−2xy+4x2\frac{\partial z}{\partial t} = 2xy(-1) + x^2(4) = -2xy+4x^2 (b) With s=1s=1, t=0t=0, x=1x=1 and y=2y=2. Thus ∂z∂s=6\frac{\partial z}{\partial s} = 6 and ∂z∂t=0\frac{\partial z}{\partial t} = 0

한 번 더 — 비슷한 문제 풀기APEX · 12.8절 · 5번
# 극값과 안장점계산자동 분류
APEX Calculus V5 CC BY-NC 4.0우리말 번역: 빌드라인 스쿨 — AI 번역·자동 검토(원문과 같은 조건)
26.APEX · 12.8절 · 20번대학 수준우리말 번역

연습문제 19–22에서 함수 z=f(x,y)z=f(x,y), x=g(s,t)x=g(s,t), y=h(s,t)y=h(s,t)가 주어져 있습니다.

(a) 다변수 연쇄 법칙을 이용하여 ∂z∂s\displaystyle \frac{\partial z}{\partial s} 와 ∂z∂t\displaystyle \frac{\partial z}{\partial t} 를 구하세요. (b) 주어진 ss 와 tt 의 값에서 ∂z∂s\displaystyle \frac{\partial z}{\partial s} 와 ∂z∂t\displaystyle \frac{\partial z}{\partial t} 의 값을 구하세요.

z=cos⁡(πx+π2y)\displaystyle z=\cos\big(\pi x+\frac{\pi}2y\big), x=st2x=st^2, y=s2ty=s^2t; s=1s=1, t=1t=1

영어 원문 보기

In Exercises 19–22, functions z=f(x,y)z=f(x,y), x=g(s,t)x=g(s,t) and y=h(s,t)y=h(s,t) are given.

(a) Use the Multivariable Chain Rule to compute ∂z∂s\displaystyle \frac{\partial z}{\partial s} and ∂z∂t\displaystyle \frac{\partial z}{\partial t}. (b) Evaluate ∂z∂s\displaystyle \frac{\partial z}{\partial s} and ∂z∂t\displaystyle \frac{\partial z}{\partial t} at the indicated ss and tt values.

z=cos⁡(πx+π2y)\displaystyle z=\cos\big(\pi x+\frac{\pi}2y\big), x=st2x=st^2, y=s2ty=s^2t; s=1s=1, t=1t=1

정답·풀이 보기

(a) ∂z∂s=−πsin⁡(πx+πy/2)(t2)−12πsin⁡(πx+πy/2)(2st)=−π(t2sin⁡(πx+πy/2)+stsin⁡(πx+πy/2))\frac{\partial z}{\partial s} = -\pi\sin(\pi x+\pi y/2)(t^2) -\frac12\pi\sin(\pi x+\pi y/2)(2st) = -\pi\Big(t^2\sin(\pi x+ \pi y/2) + st\sin(\pi x+\pi y/2)\Big);

∂z∂t=−πsin⁡(πx+πy/2)(2st)−12πsin⁡(πx+πy/2)(s2)=−π(2stsin⁡(πx+πy/2)+12s2sin⁡(πx+πy/2))\frac{\partial z}{\partial t} = -\pi\sin(\pi x+\pi y/2)(2st) -\frac12\pi\sin(\pi x+\pi y/2)(s^2)= -\pi\Big(2st\sin(\pi x+\pi y/2) + \frac12s^2\sin(\pi x+\pi y/2)\Big) (b) s=1s=1, t=1t=1 일 때 x=1x=1, y=1y=1 이다. 따라서 ∂z∂s=2π\frac{\partial z}{\partial s} = 2\pi 이고 ∂z∂t=5π/2\frac{\partial z}{\partial t} = 5\pi/2 이다.

원본 교재 풀이(영어)

(a) ∂z∂s=−πsin⁡(πx+πy/2)(t2)−12πsin⁡(πx+πy/2)(2st)=−π(t2sin⁡(πx+πy/2)+stsin⁡(πx+πy/2))\frac{\partial z}{\partial s} = -\pi\sin(\pi x+\pi y/2)(t^2) -\frac12\pi\sin(\pi x+\pi y/2)(2st) = -\pi\Big(t^2\sin(\pi x+ \pi y/2) + st\sin(\pi x+\pi y/2)\Big);

∂z∂t=−πsin⁡(πx+πy/2)(2st)−12πsin⁡(πx+πy/2)(s2)=−π(2stsin⁡(πx+πy/2)+12s2sin⁡(πx+πy/2))\frac{\partial z}{\partial t} = -\pi\sin(\pi x+\pi y/2)(2st) -\frac12\pi\sin(\pi x+\pi y/2)(s^2)= -\pi\Big(2st\sin(\pi x+\pi y/2) + \frac12s^2\sin(\pi x+\pi y/2)\Big) (b) With s=1s=1, t=1t=1, x=1x=1 and y=1y=1. Thus ∂z∂s=2π\frac{\partial z}{\partial s} = 2\pi and ∂z∂t=5π/2\frac{\partial z}{\partial t} = 5\pi/2

한 번 더 — 비슷한 문제 풀기OpenStax 3권 · 4.7절 · 40번
# 극값과 안장점계산자동 분류
APEX Calculus V5 CC BY-NC 4.0우리말 번역: 빌드라인 스쿨 — AI 번역·자동 검토(원문과 같은 조건)
27.APEX · 12.8절 · 21번대학 수준우리말 번역

연습문제 19–22에서 함수 z=f(x,y)z=f(x,y), x=g(s,t)x=g(s,t), y=h(s,t)y=h(s,t)가 주어져 있습니다.

(a) 다변수 연쇄 법칙을 이용하여 ∂z∂s\displaystyle \frac{\partial z}{\partial s} 와 ∂z∂t\displaystyle \frac{\partial z}{\partial t} 를 구하세요. (b) 주어진 ss 와 tt 의 값에서 ∂z∂s\displaystyle \frac{\partial z}{\partial s} 와 ∂z∂t\displaystyle \frac{\partial z}{\partial t} 의 값을 구하세요.

z=x2+y2\displaystyle z=x^2+y^2, x=scos⁡tx=s\cos t, y=ssin⁡ty=s\sin t; s=2s=2, t=π/4t=\pi/4

영어 원문 보기

In Exercises 19–22, functions z=f(x,y)z=f(x,y), x=g(s,t)x=g(s,t) and y=h(s,t)y=h(s,t) are given.

(a) Use the Multivariable Chain Rule to compute ∂z∂s\displaystyle \frac{\partial z}{\partial s} and ∂z∂t\displaystyle \frac{\partial z}{\partial t}. (b) Evaluate ∂z∂s\displaystyle \frac{\partial z}{\partial s} and ∂z∂t\displaystyle \frac{\partial z}{\partial t} at the indicated ss and tt values.

z=x2+y2\displaystyle z=x^2+y^2, x=scos⁡tx=s\cos t, y=ssin⁡ty=s\sin t; s=2s=2, t=π/4t=\pi/4

정답·풀이 보기

(a) ∂z∂s=2x(cos⁡t)+2y(sin⁡t)=2xcos⁡t+2ysin⁡t\frac{\partial z}{\partial s} = 2x(\cos t) + 2y(\sin t) = 2x\cos t+2y\sin t;

∂z∂t=2x(−ssin⁡t)+2y(scos⁡t)=−2xssin⁡t+2yscos⁡t\frac{\partial z}{\partial t} = 2x(-s\sin t)+2y(s\cos t) = -2xs\sin t+ 2ys\cos t (b) s=2s=2, t=π/4t=\pi/4 일 때 x=2x=\sqrt{2}, y=2y=\sqrt{2} 이다. 따라서 ∂z∂s=4\frac{\partial z}{\partial s} = 4 이고 ∂z∂t=0\frac{\partial z}{\partial t} = 0 이다.

원본 교재 풀이(영어)

(a) ∂z∂s=2x(cos⁡t)+2y(sin⁡t)=2xcos⁡t+2ysin⁡t\frac{\partial z}{\partial s} = 2x(\cos t) + 2y(\sin t) = 2x\cos t+2y\sin t;

∂z∂t=2x(−ssin⁡t)+2y(scos⁡t)=−2xssin⁡t+2yscos⁡t\frac{\partial z}{\partial t} = 2x(-s\sin t)+2y(s\cos t) = -2xs\sin t+ 2ys\cos t (b) With s=2s=2, t=π/4t=\pi/4, x=2x=\sqrt{2} and y=2y=\sqrt{2}. Thus ∂z∂s=4\frac{\partial z}{\partial s} = 4 and ∂z∂t=0\frac{\partial z}{\partial t} = 0

한 번 더 — 비슷한 문제 풀기CLP-3 · 2.9절 · 24번
# 극값과 안장점계산자동 분류
APEX Calculus V5 CC BY-NC 4.0우리말 번역: 빌드라인 스쿨 — AI 번역·자동 검토(원문과 같은 조건)
28.APEX · 12.8절 · 22번대학 수준우리말 번역

연습문제 19–22에서 함수 z=f(x,y)z=f(x,y), x=g(s,t)x=g(s,t), y=h(s,t)y=h(s,t)가 주어져 있습니다.

(a) 다변수 연쇄 법칙을 이용하여 ∂z∂s\displaystyle \frac{\partial z}{\partial s} 와 ∂z∂t\displaystyle \frac{\partial z}{\partial t} 를 구하세요. (b) 주어진 ss 와 tt 의 값에서 ∂z∂s\displaystyle \frac{\partial z}{\partial s} 와 ∂z∂t\displaystyle \frac{\partial z}{\partial t} 의 값을 구하세요.

z=e−(x2+y2)\displaystyle z=e^{-(x^2+y^2)}, x=tx=t, y=st2y=st^2; s=1s=1, t=1t=1

영어 원문 보기

In Exercises 19–22, functions z=f(x,y)z=f(x,y), x=g(s,t)x=g(s,t) and y=h(s,t)y=h(s,t) are given.

(a) Use the Multivariable Chain Rule to compute ∂z∂s\displaystyle \frac{\partial z}{\partial s} and ∂z∂t\displaystyle \frac{\partial z}{\partial t}. (b) Evaluate ∂z∂s\displaystyle \frac{\partial z}{\partial s} and ∂z∂t\displaystyle \frac{\partial z}{\partial t} at the indicated ss and tt values.

z=e−(x2+y2)\displaystyle z=e^{-(x^2+y^2)}, x=tx=t, y=st2y=st^2; s=1s=1, t=1t=1

정답·풀이 보기

(a) ∂z∂s=−2xe−(x2+y2)(0)−2ye−(x2+y2)(t2)=−2yt2e−(x2+y2)\frac{\partial z}{\partial s} = -2xe^{-(x^2+y^2)}(0) -2ye^{-(x^2+y^2)}(t^2) = -2yt^2e^{-(x^2+y^2)};

∂z∂t=−2xe−(x2+y2)(1)−2ye−(x2+y2)(2st)=−2xe−(x2+y2)−4stye−(x2+y2)\frac{\partial z}{\partial t} = -2xe^{-(x^2+y^2)}(1)-2ye^{-(x^2+y^2)}(2st) = -2xe^{-(x^2+y^2)}-4stye^{-(x^2+y^2)} (b) s=1s=1, t=1t=1 일 때 x=1x=1, y=1y=1 이다. 따라서 ∂z∂s=−2/e2\frac{\partial z}{\partial s} = -2/e^2 이고 ∂z∂t=−6/e2\frac{\partial z}{\partial t} = -6/e^2 이다.

원본 교재 풀이(영어)

(a) ∂z∂s=−2xe−(x2+y2)(0)−2ye−(x2+y2)(t2)=−2yt2e−(x2+y2)\frac{\partial z}{\partial s} = -2xe^{-(x^2+y^2)}(0) -2ye^{-(x^2+y^2)}(t^2) = -2yt^2e^{-(x^2+y^2)};

∂z∂t=−2xe−(x2+y2)(1)−2ye−(x2+y2)(2st)=−2xe−(x2+y2)−4stye−(x2+y2)\frac{\partial z}{\partial t} = -2xe^{-(x^2+y^2)}(1)-2ye^{-(x^2+y^2)}(2st) = -2xe^{-(x^2+y^2)}-4stye^{-(x^2+y^2)} (b) With s=1s=1, t=1t=1, x=1x=1 and y=1y=1. Thus ∂z∂s=−2/e2\frac{\partial z}{\partial s} = -2/e^2 and ∂z∂t=−6/e2\frac{\partial z}{\partial t} = -6/e^2

한 번 더 — 비슷한 문제 풀기OpenStax 3권 · 4.7절 · 14번
# 극값과 안장점계산자동 분류
APEX Calculus V5 CC BY-NC 4.0우리말 번역: 빌드라인 스쿨 — AI 번역·자동 검토(원문과 같은 조건)
29.APEX · 12.8절 · 27번대학 수준우리말 번역

연습문제 27–30에서 주어진 정보를 이용하여 dzdt\displaystyle \frac{dz}{dt} 또는 ∂z∂s\displaystyle \frac{\partial z}{\partial s} 와 ∂z∂t\displaystyle \frac{\partial z}{\partial t} 를 구하세요.

∂z∂x=2\displaystyle \frac{\partial z}{\partial x} = 2, ∂z∂y=1\displaystyle \frac{\partial z}{\partial y} = 1, dxdt=4\displaystyle \frac{dx}{dt} = 4, dydt=−5\displaystyle \frac{dy}{dt} = -5

영어 원문 보기

In Exercises 27–30, find dzdt\displaystyle \frac{dz}{dt}, or ∂z∂s\displaystyle \frac{\partial z}{\partial s} and ∂z∂t\displaystyle \frac{\partial z}{\partial t}, using the supplied information.

∂z∂x=2\displaystyle \frac{\partial z}{\partial x} = 2, ∂z∂y=1\displaystyle \frac{\partial z}{\partial y} = 1, dxdt=4\displaystyle \frac{dx}{dt} = 4, dydt=−5\displaystyle \frac{dy}{dt} = -5

정답·풀이 보기

dzdt=2(4)+1(−5)=3\frac{dz}{dt} = 2(4)+1(-5) = 3.

원본 교재 풀이(영어)

dzdt=2(4)+1(−5)=3\frac{dz}{dt} = 2(4)+1(-5) = 3.

한 번 더 — 비슷한 문제 풀기OpenStax 3권 · 4.7절 · 16번
# 극값과 안장점계산자동 분류
APEX Calculus V5 CC BY-NC 4.0우리말 번역: 빌드라인 스쿨 — AI 번역·자동 검토(원문과 같은 조건)
30.APEX · 12.8절 · 28번대학 수준우리말 번역

연습문제 27–30에서 주어진 정보를 이용하여 dzdt\displaystyle \frac{dz}{dt} 또는 ∂z∂s\displaystyle \frac{\partial z}{\partial s} 와 ∂z∂t\displaystyle \frac{\partial z}{\partial t} 를 구하세요.

∂z∂x=1\displaystyle \frac{\partial z}{\partial x} = 1, ∂z∂y=−3\displaystyle \frac{\partial z}{\partial y} = -3, dxdt=6\displaystyle \frac{dx}{dt} = 6, dydt=2\displaystyle \frac{dy}{dt} = 2

영어 원문 보기

In Exercises 27–30, find dzdt\displaystyle \frac{dz}{dt}, or ∂z∂s\displaystyle \frac{\partial z}{\partial s} and ∂z∂t\displaystyle \frac{\partial z}{\partial t}, using the supplied information.

∂z∂x=1\displaystyle \frac{\partial z}{\partial x} = 1, ∂z∂y=−3\displaystyle \frac{\partial z}{\partial y} = -3, dxdt=6\displaystyle \frac{dx}{dt} = 6, dydt=2\displaystyle \frac{dy}{dt} = 2

정답·풀이 보기

dzdt=1(6)+(−3)(2)=0\frac{dz}{dt} = 1(6)+(-3)(2) = 0.

원본 교재 풀이(영어)

dzdt=1(6)+(−3)(2)=0\frac{dz}{dt} = 1(6)+(-3)(2) = 0.

한 번 더 — 비슷한 문제 풀기APEX · 12.8절 · 2번
# 극값과 안장점계산자동 분류
APEX Calculus V5 CC BY-NC 4.0우리말 번역: 빌드라인 스쿨 — AI 번역·자동 검토(원문과 같은 조건)
31.APEX · 12.8절 · 29번대학 수준우리말 번역

연습문제 27–30에서 주어진 정보를 이용하여 dzdt\displaystyle \frac{dz}{dt} 또는 ∂z∂s\displaystyle \frac{\partial z}{\partial s} 와 ∂z∂t\displaystyle \frac{\partial z}{\partial t} 를 구하세요.

∂z∂x=−4\displaystyle \frac{\partial z}{\partial x} = -4, ∂z∂y=9\displaystyle \frac{\partial z}{\partial y} = 9,

∂x∂s=5\displaystyle \frac{\partial x}{\partial s} = 5, ∂x∂t=7\displaystyle \frac{\partial x}{\partial t} = 7, ∂y∂s=−2\displaystyle \frac{\partial y}{\partial s} = -2, ∂y∂t=6\displaystyle \frac{\partial y}{\partial t} = 6

영어 원문 보기

In Exercises 27–30, find dzdt\displaystyle \frac{dz}{dt}, or ∂z∂s\displaystyle \frac{\partial z}{\partial s} and ∂z∂t\displaystyle \frac{\partial z}{\partial t}, using the supplied information.

∂z∂x=−4\displaystyle \frac{\partial z}{\partial x} = -4, ∂z∂y=9\displaystyle \frac{\partial z}{\partial y} = 9,

∂x∂s=5\displaystyle \frac{\partial x}{\partial s} = 5, ∂x∂t=7\displaystyle \frac{\partial x}{\partial t} = 7, ∂y∂s=−2\displaystyle \frac{\partial y}{\partial s} = -2, ∂y∂t=6\displaystyle \frac{\partial y}{\partial t} = 6

정답·풀이 보기

∂z∂s=−4(5)+9(−2)=−38\frac{\partial z}{\partial s} = -4(5)+9(-2) = -38,

∂z∂t=−4(7)+9(6)=26\frac{\partial z}{\partial t} = -4(7)+9(6) = 26.

원본 교재 풀이(영어)

∂z∂s=−4(5)+9(−2)=−38\frac{\partial z}{\partial s} = -4(5)+9(-2) = -38,

∂z∂t=−4(7)+9(6)=26\frac{\partial z}{\partial t} = -4(7)+9(6) = 26.

한 번 더 — 비슷한 문제 풀기OpenStax 3권 · 4.7절 · 18번
# 극값과 안장점계산자동 분류
APEX Calculus V5 CC BY-NC 4.0우리말 번역: 빌드라인 스쿨 — AI 번역·자동 검토(원문과 같은 조건)
32.APEX · 12.8절 · 30번대학 수준우리말 번역

연습문제 27–30에서 주어진 정보를 이용하여 dzdt\displaystyle \frac{dz}{dt} 또는 ∂z∂s\displaystyle \frac{\partial z}{\partial s} 와 ∂z∂t\displaystyle \frac{\partial z}{\partial t} 를 구하세요.

∂z∂x=2\displaystyle \frac{\partial z}{\partial x} = 2, ∂z∂y=1\displaystyle \frac{\partial z}{\partial y} = 1,

∂x∂s=−2\displaystyle \frac{\partial x}{\partial s} = -2, ∂x∂t=3\displaystyle \frac{\partial x}{\partial t} = 3, ∂y∂s=2\displaystyle \frac{\partial y}{\partial s} = 2, ∂y∂t=−1\displaystyle \frac{\partial y}{\partial t} = -1

영어 원문 보기

In Exercises 27–30, find dzdt\displaystyle \frac{dz}{dt}, or ∂z∂s\displaystyle \frac{\partial z}{\partial s} and ∂z∂t\displaystyle \frac{\partial z}{\partial t}, using the supplied information.

∂z∂x=2\displaystyle \frac{\partial z}{\partial x} = 2, ∂z∂y=1\displaystyle \frac{\partial z}{\partial y} = 1,

∂x∂s=−2\displaystyle \frac{\partial x}{\partial s} = -2, ∂x∂t=3\displaystyle \frac{\partial x}{\partial t} = 3, ∂y∂s=2\displaystyle \frac{\partial y}{\partial s} = 2, ∂y∂t=−1\displaystyle \frac{\partial y}{\partial t} = -1

정답·풀이 보기

∂z∂s=2(−2)+1(2)=−2\frac{\partial z}{\partial s} = 2(-2)+1(2) = -2,

∂z∂t=2(3)+1(−1)=5\frac{\partial z}{\partial t} = 2(3)+1(-1) = 5.

원본 교재 풀이(영어)

∂z∂s=2(−2)+1(2)=−2\frac{\partial z}{\partial s} = 2(-2)+1(2) = -2,

∂z∂t=2(3)+1(−1)=5\frac{\partial z}{\partial t} = 2(3)+1(-1) = 5.

한 번 더 — 비슷한 문제 풀기OpenStax 3권 · 4.7절 · 20번
# 극값과 안장점계산자동 분류
APEX Calculus V5 CC BY-NC 4.0우리말 번역: 빌드라인 스쿨 — AI 번역·자동 검토(원문과 같은 조건)
33.CLP-3 · 2.9절 · 2번대학 수준우리말 번역

(x,y)(x,y) 가 정사각형 영역 ∣x∣≤1|x|\le 1, ∣y∣≤1|y|\le 1 에서 변할 때, 곡면  z=x2+y2 \ z=\sqrt{x^2+y^2}\ 의 가장 높은 점과 가장 낮은 점을 구하세요. 그 점들에서  zx, zy \ z_x,\ z_y\ 의 값에 대해 논하세요. 답하는 과정에서 도함수를 구하지 마세요.

영어 원문 보기

Find the high and low points of the surface  z=x2+y2 \ z=\sqrt{x^2+y^2}\ with (x,y)(x,y) varying over the square  ∣x∣≤1\ |x|\le 1, ∣y∣≤1 |y|\le 1\ . Discuss the values of  zx, zy \ z_x,\ z_y\ there. Do not evaluate any derivatives in answering this question.

정답·풀이 보기

(x,y)(x,y) 에서의 높이 x2+y2\sqrt{x^2+y^2} 은 (x,y)(x,y) 에서 (0,0)(0,0) 까지의 거리이다. 따라서 최소 높이는 (0,0,0)(0,0,0) 에서 0이다. 이 곡면은 원뿔이다. 원뿔은 (0,0,0)(0,0,0) 에서 뾰족하며, 그 점에서 미분계수 zxz_x 와 zyz_y 는 존재하지 않는다. 최대 높이는 (x,y)(x,y) 가 (0,0)(0,0) 에서 가능한 한 멀리 있을 때 얻어진다. 가장 높은 점은 (±1,±1,2)(\pm 1,\pm 1,\sqrt{2}) 이다. 이 점들에서 zxz_x 와 zyz_y 는 존재하지만 0이 아니다. ∣x∣,∣y∣≤1|x|,|y|\le 1 이라는 제한이 없다면 이 점들은 가장 높은 점이 아닐 것이다.

원본 교재 풀이(영어)

The height x2+y2\sqrt{x^2+y^2} at (x,y)(x,y) is the distance from (x,y)(x,y) to (0,0)(0,0). So the minimum height is zero at (0,0,0)(0,0,0). The surface is a cone. The cone has a point at (0,0,0)(0,0,0) and the derivatives zxz_x and zyz_y do not exist there. The maximum height is achieved when (x,y)(x,y) is as far as possible from (0,0)(0,0). The highest points are at (±1,±1,2)(\pm 1,\pm 1,\sqrt{2}). There zxz_x and zyz_y exist but are not zero. These points would not be the highest points if it were not for the restriction ∣x∣,∣y∣≤1|x|,|y|\le 1.

한 번 더 — 비슷한 문제 풀기APEX · 12.8절 · 6번
# 극값과 안장점계산기본자동 분류
34.CLP-3 · 2.9절 · 3번대학 수준우리말 번역

한 변수 매끄러운 함수  f(t) \ f(t)\ (tt 는 모든 실수 값을 가진다)에 대하여 t0t_0 이 극솟값 또는 극댓값을 주는 점이면  f′(t0)=0\ f'(t_0)=0 이다. 직선  x=a+td \ \mathbf{x}=\mathbf{a}+t\mathbf{d}\ 위의 점들로 제한한 매끄러운 함수  g(x) \ g(\mathbf{x})\ 가 x0\mathbf{x}_0 에서 극솟값 또는 극댓값을 갖기 위한 이와 유사한 필요조건을 유도하세요. 이 조건에는 g(x)g(\mathbf{x}) 의 그래디언트가 들어가야 합니다.

영어 원문 보기

If t0t_0 is a local minimum or maximum of the smooth function  f(t) \ f(t)\ of one variable (tt runs over all real numbers) then  f′(t0)=0.\ f'(t_0)=0. Derive an analogous necessary condition for x0\mathbf{x}_0 to be a local minimum or maximium of the smooth function  g(x) \ g(\mathbf{x})\ restricted to points on the line  x=a+td .\ \mathbf{x}=\mathbf{a}+t\mathbf{d}\ . The test should involve the gradient of g(x)g(\mathbf{x}).

정답·풀이 보기

f(t)=g(a+td)f(t)=g(\mathbf{a}+t\mathbf{d}) 로 정의하고, x0=a+t0d\mathbf{x}_0=\mathbf{a}+t_0\mathbf{d} 가 되도록 t0t_0 을 정한다. 그러면 f′(t)=∇g(a+td)⋅df'(t)={ \boldsymbol{\nabla} } g(\mathbf{a}+t\mathbf{d})\cdot\mathbf{d} 이다. 이를 확인하기 위해 a=<a1,a2,a3>\mathbf{a}=\left< a_1,a_2,a_3\right>, d=<d1,d2,d3>\mathbf{d}=\left< d_1,d_2,d_3\right> 로 쓰자. 그러면

f(t)=g(a1+td1,a2+td2,a3+td3)f(t)=g(a_1+td_1,a_2+td_2,a_3+td_3)

이므로 연쇄 법칙에 의해

f′(t)=∂g∂x(a1+td1,a2+td2,a3+td3) d1+∂g∂y(a1+td1,a2+td2,a3+td3) d2+∂g∂z(a1+td1,a2+td2,a3+td3) d3=∇g(a+td)⋅d\begin{aligned} f'(t) &= \frac{\partial g}{\partial x}(a_1+td_1,a_2+td_2,a_3+td_3)\,d_1 +\frac{\partial g}{\partial y}(a_1+td_1,a_2+td_2,a_3+td_3)\,d_2 \\& +\frac{\partial g}{\partial z}(a_1+td_1,a_2+td_2,a_3+td_3)\,d_3 \\ &={ \boldsymbol{\nabla} } g(\mathbf{a}+t\mathbf{d})\cdot\mathbf{d} \end{aligned}

이다. 그러면 x0\mathbf{x}_0 이 주어진 직선으로 제한한 gg 의 극댓값 또는 극솟값을 주는 점일 필요충분조건은 t0t_0 이 f(t)f(t) 의 극댓값 또는 극솟값을 주는 점인 것이다. 그렇다면 f′(t0)f'(t_0) 은 반드시 00 이 된다. 따라서 x0\mathbf{x}_0 이 주어진 직선으로 제한한 gg 의 극댓값 또는 극솟값을 주는 점이면 ∇g(x0)⋅d=0{ \boldsymbol{\nabla} } g(\mathbf{x}_0)\cdot\mathbf{d}=0, 즉 ∇g(x0)⊥d{ \boldsymbol{\nabla} } g(\mathbf{x}_0)\perp\mathbf{d} 이고, 어떤 t0t_0 에 대해 x0=a+t0d\mathbf{x}_0=\mathbf{a}+t_0\mathbf{d} 이다. 두 번째 조건은 x0x_0 이 직선 위에 있음을 보장하기 위한 것이다.

원본 교재 풀이(영어)

Define f(t)=g(a+td)f(t)=g(\mathbf{a}+t\mathbf{d}) and determine t0t_0 by x0=a+t0d\mathbf{x}_0=\mathbf{a}+t_0\mathbf{d}. Then f′(t)=∇g(a+td)⋅df'(t)={ \boldsymbol{\nabla} } g(\mathbf{a}+t\mathbf{d})\cdot\mathbf{d}. To see this, write a=<a1,a2,a3>\mathbf{a}=\left< a_1,a_2,a_3\right> and d=<d1,d2,d3>\mathbf{d}=\left< d_1,d_2,d_3\right>. Then

f(t)=g(a1+td1,a2+td2,a3+td3)f(t)=g(a_1+td_1,a_2+td_2,a_3+td_3)

So, by the chain rule,

f′(t)=∂g∂x(a1+td1,a2+td2,a3+td3) d1+∂g∂y(a1+td1,a2+td2,a3+td3) d2+∂g∂z(a1+td1,a2+td2,a3+td3) d3=∇g(a+td)⋅d\begin{aligned} f'(t) &= \frac{\partial g}{\partial x}(a_1+td_1,a_2+td_2,a_3+td_3)\,d_1 +\frac{\partial g}{\partial y}(a_1+td_1,a_2+td_2,a_3+td_3)\,d_2 \\& +\frac{\partial g}{\partial z}(a_1+td_1,a_2+td_2,a_3+td_3)\,d_3 \\ &={ \boldsymbol{\nabla} } g(\mathbf{a}+t\mathbf{d})\cdot\mathbf{d} \end{aligned}

Then x0\mathbf{x}_0 is a local max or min of the restriction of gg to the specified line if and only if t0t_0 is a local max or min of f(t)f(t). If so, f′(t0)f'(t_0) necessarily vanishes. So if x0\mathbf{x}_0 is a local max or min of the restriction of gg to the specified line, then ∇g(x0)⋅d=0{ \boldsymbol{\nabla} } g(\mathbf{x}_0)\cdot\mathbf{d}=0, i.e. ∇g(x0)⊥d{ \boldsymbol{\nabla} } g(\mathbf{x}_0)\perp\mathbf{d}, and x0=a+t0d\mathbf{x}_0=\mathbf{a}+t_0\mathbf{d} for some t0t_0. The second condition is to ensure that x0x_0 lies on the line.

한 번 더 — 비슷한 문제 풀기CLP-3 · 2.9절 · 2번
# 극값과 안장점계산기본자동 분류
35.CLP-3 · 2.9절 · 8번대학 수준우리말 번역

평면 2x+y+z=52x + y + z = 5 중에서 x≥0x \ge 0, y≥0y \ge 0, z≥0z \ge 0 인 부분에서 x2y2zx^2 y^2 z 의 최댓값과 최솟값을 구하세요. 또한 그 극값이 나타나는 모든 점을 구하세요.

영어 원문 보기

Find the largest and smallest values of x2y2zx^2 y^2 z in the part of the plane 2x+y+z=52x + y + z = 5 where x≥0x \ge 0, y≥0y \ge 0 and z≥0z \ge 0. Also find all points where those extreme values occur.

정답·풀이 보기

생각하는 영역은 다음과 같다.

D={ (x,y,z) ∣ x≥0, y≥0, z≥0, 2x+y+z=5 }D=\big\{ \ (x,y,z)\ \big|\ x\ge 0,\ y\ge 0,\ z\ge 0,\ 2x+y+z=5\ \big\}

먼저 이 영역의 경계에서는 xx, yy, zz 중 적어도 하나가 0 임에 주목한다. 따라서 f(x,y,z)=x2y2zf(x,y,z)=x^2 y^2 z 는 경계에서 0 이다. DD 의 경계가 아닌 모든 점에서 ff 의 값은 0 보다 크므로, ff 의 최솟값은 00 이고 그 값은 다음 집합의 모든 점에서 나타난다.

∂D={ (x,y,z) ∣ x≥0, y≥0, z≥0, 2x+y+z=5, x,y,z 중 적어도 하나는 0 }\partial D = \big\{ \ (x,y,z)\ \big|\ x\ge 0,\ y\ge 0,\ z\ge 0,\ 2x+y+z=5,\ \text{$x,y,z$ 중 적어도 하나는 0}\ \big\}

ff 의 최댓값은 임계점에서 나타난다. DD 위에서

f=x2y2(5−2x−y)=5x2y2−2x3y2−x2y3\begin{aligned} f &= x^2 y^2 (5-2x-y) =5x^2 y^2 - 2x^3 y^2 -x^2 y^3 \end{aligned}

이므로 임계점은 다음 연립방정식의 해이다.

0=fx(x,y)=10xy2−6x2y2−2xy30=fy(x,y)=10x2y−4x3y−3x2y2\begin{aligned} 0&=f_x(x,y) = 10xy^2 -6x^2y^2 -2xy^3 \\ 0&=f_y(x,y) = 10x^2y -4x^3y -3x^2y^2 \end{aligned}

첫째 식을 xy2xy^2 으로, 둘째 식을 x2yx^2y 로 나누면 (x,y≠0x,y\ne 0 임을 기억한다)

10−6x−2y=0또는3x+y=510−4x−3y=0또는4x+3y=10\begin{aligned} 10 -6x -2y &=0 &\qquad\text{또는}\qquad 3x+y&=5 \\ 10 -4x -3y &=0 &\qquad\text{또는}\qquad 4x+3y&=10 \end{aligned}

첫째 식에서 얻은 y=5−3xy=5-3x 를 둘째 식에 대입하면

4x+3(5−3x)=10  ⟹  −5x+15=10  ⟹  x=1, y=5−3(1)=24x+3(5-3x)=10 \implies -5x +15 =10 \implies x=1,\ y=5-3(1)=2

따라서 ff 의 최댓값은 (1,2,1)(1,2,1) 에서 (1)2(2)2(5−2−2)=4(1)^2(2)^2(5-2-2)=4 이다.

원본 교재 풀이(영어)

The region of interest is

D={ (x,y,z) ∣ x≥0, y≥0, z≥0, 2x+y+z=5 }D=\big\{ \ (x,y,z)\ \big|\ x\ge 0,\ y\ge 0,\ z\ge 0,\ 2x+y+z=5\ \big\}

First observe that, on the boundary of this region, at least one of xx, yy and zz is zero. So f(x,y,z)=x2y2zf(x,y,z)=x^2 y^2 z is zero on the boundary. As ff takes values which are strictly bigger than zero at all points of DD that are not on the boundary, the minimum value of ff is 00 on

∂D={ (x,y,z) ∣ x≥0, y≥0, z≥0, 2x+y+z=5, at least one of x,y,z zero }\partial D = \big\{ \ (x,y,z)\ \big|\ x\ge 0,\ y\ge 0,\ z\ge 0,\ 2x+y+z=5,\ \text{at least one of $x,y,z$ zero}\ \big\}

The maximum value of ff will be taken at a critical point. On DD

f=x2y2(5−2x−y)=5x2y2−2x3y2−x2y3\begin{aligned} f &= x^2 y^2 (5-2x-y) =5x^2 y^2 - 2x^3 y^2 -x^2 y^3 \end{aligned}

So the critical points are the solutions of

0=fx(x,y)=10xy2−6x2y2−2xy30=fy(x,y)=10x2y−4x3y−3x2y2\begin{aligned} 0&=f_x(x,y) = 10xy^2 -6x^2y^2 -2xy^3 \\ 0&=f_y(x,y) = 10x^2y -4x^3y -3x^2y^2 \end{aligned}

or, dividing by the first equation by xy2xy^2 and the second equation by x2yx^2y, (recall that x,y≠0x,y\ne 0)

10−6x−2y=0or3x+y=510−4x−3y=0or4x+3y=10\begin{aligned} 10 -6x -2y &=0 &\qquad\text{or}\qquad 3x+y&=5 \\ 10 -4x -3y &=0 &\qquad\text{or}\qquad 4x+3y&=10 \end{aligned}

Substituting y=5−3xy=5-3x, from the first equation, into the second equation gives

4x+3(5−3x)=10  ⟹  −5x+15=10  ⟹  x=1, y=5−3(1)=24x+3(5-3x)=10 \implies -5x +15 =10 \implies x=1,\ y=5-3(1)=2

So the maximum value of ff is (1)2(2)2(5−2−2)=4(1)^2(2)^2(5-2-2)=4 at (1,2,1)(1,2,1).

한 번 더 — 비슷한 문제 풀기OpenStax 3권 · 4.7절 · 30번
# 극값과 안장점계산보통자동 분류
36.CLP-3 · 2.9절 · 12번대학 수준우리말 번역

(x,y)(x,y) 가 정사각형 0≤x≤10\le x\le 1, 0≤y≤10\le y\le 1 위의 모든 점을 움직일 때, f(x,y)=xy−x3y2f(x,y)=xy-x^3y^2 의 최댓값과 최솟값을 구하세요.

영어 원문 보기

Find the maximum and minimum values of f(x,y)=xy−x3y2f(x,y)=xy-x^3y^2 when (x,y)(x,y) runs over the square 0≤x≤10\le x\le 1, 0≤y≤10\le y\le 1.

정답·풀이 보기

주어진 함수와 그 1계 도함수는 다음과 같다.

f(x,y)=xy−x3y2fx(x,y)=y−3x2y2fy(x,y)=x−2x3y\begin{aligned} f(x,y)=xy-x^3y^2\qquad f_x(x,y)=y-3x^2y^2\qquad f_y(x,y)=x-2x^3y \end{aligned}

  • 먼저 임계점을 구한다.

fx=0  ⟺  y(1−3x2y)=0  ⟺  y=0 또는 3x2y=1fy=0  ⟺  x(1−2x2y)=0  ⟺  x=0 또는 2x2y=1\begin{aligned} f_x&=0 & &\quad\iff\quad &y(1-3x^2y)&=0 & &\quad\iff\quad & &y=0 \text{ 또는 } 3x^2y=1 \\ f_y&=0 & &\quad\iff\quad &x(1-2x^2y)&=0 & &\quad\iff\quad & &x=0 \text{ 또는 } 2x^2y=1 \end{aligned}

  • y=0y=0 이면 2x2y=12x^2y=1 일 수 없으므로 x=0x=0 이어야 한다.
  • 3x2y=13x^2y=1 이면 x=0x=0 일 수 없으므로 2x2y=12x^2y=1 이어야 한다. 두 식을 나누면 1=3x2y2x2y=321=\frac{3x^2y}{2x^2y}=\frac{3}{2} 이 되어 불가능하다.

따라서 정사각형 안의 임계점은 (0,0)(0,0) 뿐이다. 그 점에서 f=0f=0 이다.

  • 다음으로 경계 중 x=0x=0 인 부분을 살펴본다. 그 위에서 f=0f=0 이다.
  • 다음으로 경계 중 y=0y=0 인 부분을 살펴본다. 그 위에서 f=0f=0 이다.
  • 다음으로 경계 중 x=1x=1 인 부분을 살펴본다. 그 위에서 f=y−y2f=y-y^2 이다. ddy(y−y2)=1−2y\frac{\mathrm{d}}{\mathrm{d}y}(y-y^2)=1-2y 이므로, 0≤y≤10\le y\le 1 에서 y−y2y-y^2 의 최댓값과 최솟값은 y=0y=0 (이때 f=0f=0) 또는 y=12y=\tfrac{1}{2} (이때 f=14f=\frac{1}{4}) 또는 y=1y=1 (이때 f=0f=0) 에서만 나타날 수 있다.
  • 다음으로 경계 중 y=1y=1 인 부분을 살펴본다. 그 위에서 f=x−x3f=x-x^3 이다. ddx(x−x3)=1−3x2\frac{\mathrm{d}}{\mathrm{d}x}(x-x^3)=1-3x^2 이므로, 0≤x≤10\le x\le 1 에서 x−x3x-x^3 의 최댓값과 최솟값은 x=0x=0 (이때 f=0f=0) 또는 x=13x=\frac{1}{\sqrt{3}} (이때 f=233f=\frac{2}{3\sqrt{3}}) 또는 x=1x=1 (이때 f=0f=0) 에서만 나타날 수 있다.

이상을 모으면 최댓값과 최솟값의 후보는 다음과 같다.

점(0,0)x=0y=0(1,0)(1,12)(1,1)(0,1)(13,1)(1,1)함숫값 f000014002330최소최소최소최소최소최소최대최소\begin{array}{|c|c|c|c|c|c|c|c|c|c|}\hline \text{점} & (0,0) & x=0 & y=0 & (1,0) & (1,\tfrac{1}{2}) & (1,1) & (0,1) & (\frac{1}{\sqrt{3}},1) & (1,1) \\ \hline \text{함숫값 }f & 0 & 0 & 0 & 0 & \frac{1}{4} & 0 & 0 & \frac{2}{3\sqrt{3}} & 0 \\ \hline & \text{최소} & \text{최소} & \text{최소} & \text{최소} & & \text{최소} & \text{최소} & \text{최대} & \text{최소} \\ \hline \end{array}

이 표에서 ff 의 가장 큰 값과 가장 작은 값은 다음과 같다.

최소=0최대=233≈0.385\text{최소}=0\qquad \text{최대}=\frac{2}{3\sqrt{3}}\approx0.385

원본 교재 풀이(영어)

The specified function and its first order derivatives are

f(x,y)=xy−x3y2fx(x,y)=y−3x2y2fy(x,y)=x−2x3y\begin{aligned} f(x,y)=xy-x^3y^2\qquad f_x(x,y)=y-3x^2y^2\qquad f_y(x,y)=x-2x^3y \end{aligned}

  • First, we find the critical points.

fx=0  ⟺  y(1−3x2y)=0  ⟺  y=0 or 3x2y=1fy=0  ⟺  x(1−2x2y)=0  ⟺  x=0 or 2x2y=1\begin{aligned} f_x&=0 & &\quad\iff\quad &y(1-3x^2y)&=0 & &\quad\iff\quad & &y=0 \text{ or } 3x^2y=1 \\ f_y&=0 & &\quad\iff\quad &x(1-2x^2y)&=0 & &\quad\iff\quad & &x=0 \text{ or } 2x^2y=1 \end{aligned}

  • If y=0y=0, we cannot have 2x2y=12x^2y=1, so we must have x=0x=0.
  • If 3x2y=13x^2y=1, we cannot have x=0x=0, so we must have 2x2y=12x^2y=1. Dividing gives 1=3x2y2x2y=321=\frac{3x^2y}{2x^2y}=\frac{3}{2} which is impossible.

So the only critical point in the square is (0,0)(0,0). There f=0f=0.

  • Next, we look at the part of the boundary with x=0x=0. There f=0f=0.
  • Next, we look at the part of the boundary with y=0y=0. There f=0f=0.
  • Next, we look at the part of the boundary with x=1x=1. There f=y−y2f=y-y^2. As ddy(y−y2)=1−2y\frac{\mathrm{d}}{\mathrm{d}y}(y-y^2)=1-2y, the max and min of y−y2y-y^2 for 0≤y≤10\le y\le 1 must occur either at y=0y=0, where f=0f=0, or at y=12y=\tfrac{1}{2}, where f=14f=\frac{1}{4}, or at y=1y=1, where f=0f=0.
  • Next, we look at the part of the boundary with y=1y=1. There f=x−x3f=x-x^3. As ddx(x−x3)=1−3x2\frac{\mathrm{d}}{\mathrm{d}x}(x-x^3)=1-3x^2, the max and min of x−x3x-x^3 for 0≤x≤10\le x\le 1 must occur either at x=0x=0, where f=0f=0, or at x=13x=\frac{1}{\sqrt{3}}, where f=233f=\frac{2}{3\sqrt{3}}, or at x=1x=1, where f=0f=0.

All together, we have the following candidates for max and min.

point(0,0)x=0y=0(1,0)(1,12)(1,1)(0,1)(13,1)(1,1)value of f000014002330minminminminminminmaxmin\begin{array}{|c|c|c|c|c|c|c|c|c|c|}\hline \text{point} & (0,0) & x=0 & y=0 & (1,0) & (1,\tfrac{1}{2}) & (1,1) & (0,1) & (\frac{1}{\sqrt{3}},1) & (1,1) \\ \hline \text{value of }f & 0 & 0 & 0 & 0 & \frac{1}{4} & 0 & 0 & \frac{2}{3\sqrt{3}} & 0 \\ \hline & \text{min} & \text{min} & \text{min} & \text{min} & & \text{min} & \text{min} & \text{max} & \text{min} \\ \hline \end{array}

The largest and smallest values of ff in this table are

min=0max=233≈0.385\text{min}=0\qquad \text{max}=\frac{2}{3\sqrt{3}}\approx0.385

한 번 더 — 비슷한 문제 풀기CLP-3 · 2.9절 · 13번
# 극값과 안장점계산보통자동 분류
37.CLP-3 · 2.9절 · 17번대학 수준우리말 번역

직사각형 영역

R={ (x,y) ∣ −1≤x≤3, −1≤y≤1 }R = \big\{ \ (x, y)\ \big|\ -1 \le x \le 3,\ -1 \le y \le 1\ \big\}

에서 함수 f(x,y)=5+2x−x2−4y2f(x, y) = 5 + 2x - x^2 - 4y^2 의 최댓값과 최솟값을 구하세요.

영어 원문 보기

Find the absolute maximum and minimum values of the function f(x,y)=5+2x−x2−4y2f(x, y) = 5 + 2x - x^2 - 4y^2 on the rectangular region

R={ (x,y) ∣ −1≤x≤3, −1≤y≤1 }R = \big\{ \ (x, y)\ \big|\ -1 \le x \le 3,\ -1 \le y \le 1\ \big\}

정답·풀이 보기

최댓값과 최솟값은 임계점에서 나타나거나 RR 의 경계에서 나타난다.

  • 임계점은 다음 연립방정식의 해이다.

0=fx(x,y)=2−2x0=fy(x,y)=−8y\begin{aligned} 0&=f_x(x,y) = 2-2x \\ 0&=f_y(x,y) = -8y \\ \end{aligned}

따라서 임계점은 (1,0)(1,0) 하나뿐이다.

  • RR 의 경계 중 변 x=−1x=-1, −1≤y≤1-1\le y\le 1 위에서

f(−1,y)=2−4y2f(-1,y) = 2-4y^2

이 함수는 ∣y∣|y| 가 커질수록 감소한다. 따라서 −1≤y≤1-1\le y\le 1 에서 최댓값은 y=0y=0 일 때, 최솟값은 y=±1y=\pm 1 일 때 나타난다.

  • RR 의 경계 중 변 x=3x=3, −1≤y≤1-1\le y\le 1 위에서

f(3,y)=2−4y2f(3,y) = 2-4y^2

이 함수는 ∣y∣|y| 가 커질수록 감소한다. 따라서 −1≤y≤1-1\le y\le 1 에서 최댓값은 y=0y=0 일 때, 최솟값은 y=±1y=\pm 1 일 때 나타난다.

  • RR 의 경계 중 두 변 y=±1y=\pm 1, −1≤x≤3-1\le x\le 3 위에서

f(x,±1)=1+2x−x2=2−(x−1)2f(x,\pm 1) = 1+2x-x^2 = 2 -(x-1)^2

이 함수는 ∣x−1∣|x-1| 이 커질수록 감소한다. 따라서 −1≤x≤3-1\le x\le 3 에서 최댓값은 x=1x=1 일 때, 최솟값은 x=3x= 3 과 x=−1x=-1 일 때 나타난다(두 점 모두 x=1x=1 에서 거리가 22 이다).

따라서 최솟값과 최댓값이 나타날 위치의 후보는 다음과 같다.

점(1,0)(−1,0)(1,±1)(−1,±1)(3,0)(3,±1)함숫값 f622−22−2최대최소최소\begin{array}{|c|c|c|c|c|c|c|}\hline \text{점} & (1,0) & (-1,0) & (1,\pm 1) & (-1,\pm 1) & (3,0) & (3,\pm 1) \\ \hline \text{함숫값 }f & 6 & 2 & 2 & -2 & 2 & -2 \\ \hline & \text{최대} & & & \text{최소} & & \text{최소} \\ \hline \end{array}

따라서 최솟값은 −2-2 이고 최댓값은 66 이다.

원본 교재 풀이(영어)

The maximum and minimum must either occur at a critical point or on the boundary of RR.

  • The critical points are the solutions of

0=fx(x,y)=2−2x0=fy(x,y)=−8y\begin{aligned} 0&=f_x(x,y) = 2-2x \\ 0&=f_y(x,y) = -8y \\ \end{aligned}

So the only critical point is (1,0)(1,0).

  • On the side x=−1x=-1, −1≤y≤1-1\le y\le 1 of the boundary of RR

f(−1,y)=2−4y2f(-1,y) = 2-4y^2

This function decreases as ∣y∣|y| increases. So its maximum value on −1≤y≤1-1\le y\le 1 is achieved at y=0y=0 and its minimum value is achieved at y=±1y=\pm 1.

  • On the side x=3x=3, −1≤y≤1-1\le y\le 1 of the boundary of RR

f(3,y)=2−4y2f(3,y) = 2-4y^2

This function decreases as ∣y∣|y| increases. So its maximum value on −1≤y≤1-1\le y\le 1 is achieved at y=0y=0 and its minimum value is achieved at y=±1y=\pm 1.

  • On both sides y=±1y=\pm 1, −1≤x≤3-1\le x\le 3 of the boundary of RR

f(x,±1)=1+2x−x2=2−(x−1)2f(x,\pm 1) = 1+2x-x^2 = 2 -(x-1)^2

This function decreases as ∣x−1∣|x-1| increases. So its maximum value on −1≤x≤3-1\le x\le 3 is achieved at x=1x=1 and its minimum value is achieved at x=3x= 3 and x=−1x=-1 (both of whom are a distance 22 from x=1x=1).

So we have the following candidates for the locations of the min and max

point(1,0)(−1,0)(1,±1)(−1,±1)(3,0)(3,±1)value of f622−22−2maxminmin\begin{array}{|c|c|c|c|c|c|c|}\hline \text{point} & (1,0) & (-1,0) & (1,\pm 1) & (-1,\pm 1) & (3,0) & (3,\pm 1) \\ \hline \text{value of }f & 6 & 2 & 2 & -2 & 2 & -2 \\ \hline & \text{max} & & & \text{min} & & \text{min} \\ \hline \end{array}

So the minimum is −2-2 and the maximum is 66.

한 번 더 — 비슷한 문제 풀기CLP-3 · 2.9절 · 26번
# 극값과 안장점계산보통자동 분류
38.CLP-3 · 2.9절 · 18번대학 수준우리말 번역

닫힌 유계 정의역 x2+y2≤1x^2 + y^2 \le 1 에서 함수 h(x,y)=−4x−2y+6h(x,y) = -4x - 2y + 6 의 최솟값을 구하세요.

영어 원문 보기

Find the minimum of the function h(x,y)=−4x−2y+6h(x,y) = -4x - 2y + 6 on the closed bounded domain defined by x2+y2≤1x^2 + y^2 \le 1.

답 쓰고 채점
정답·풀이 보기

∇h=<−4 , −2>{ \boldsymbol{\nabla} } h = \left< -4\,,\,-2 \right> 는 결코 영이 되지 않으므로 hh 는 임계점을 갖지 않고, 원판 x2+y2≤1x^2+y^2\le 1 에서 hh 의 최솟값은 원판의 경계 x2+y2=1x^2+y^2=1 에서 나타나야 한다. 경계에서의 최솟값을 구하기 위해 x2+y2≤1x^2+y^2\le 1 을 x=cos⁡θx=\cos\theta, y=sin⁡θy=\sin\theta 로 매개변수화하고 다음의 최솟값을 구한다.

H(θ)=−4cos⁡θ−2sin⁡θ+6\begin{aligned} H(\theta) = -4\cos\theta -2\sin\theta +6 \end{aligned}

다음이 성립하므로

0=H′(θ)=4sin⁡θ−2cos⁡θ  ⟹  x=cos⁡θ=2sin⁡θ=2y\begin{aligned} 0=H'(\theta) = 4\sin\theta -2\cos\theta \implies x=\cos\theta = 2\sin\theta =2y \end{aligned}

따라서

1=x2+y2=4y2+y2=5y2  ⟹  y=±15, x=±25\begin{aligned} 1=x^2+y^2 = 4y^2 +y^2 =5 y^2 \implies y = \pm\frac{1}{\sqrt{5}},\ x = \pm\frac{2}{\sqrt{5}} \end{aligned}

이 두 점에서

h=6−4x−2y=6−10y=6∓105=6∓25\begin{aligned} h = 6-4x-2y = 6 - 10y =6 \mp \frac{10}{\sqrt{5}} =6 \mp 2\sqrt{5} \end{aligned}

이다. 최솟값은 6−256-2\sqrt{5} 이다.

원본 교재 풀이(영어)

Since ∇h=<−4 , −2>{ \boldsymbol{\nabla} } h = \left< -4\,,\,-2 \right> is never zero, hh has no critical points and the minimum of hh on the disk x2+y2≤1x^2+y^2\le 1 must be taken on the boundary, x2+y2=1x^2+y^2=1, of the disk. To find the minimum on the boundary, we parametrize x2+y2≤1x^2+y^2\le 1 by x=cos⁡θx=\cos\theta, y=sin⁡θy=\sin\theta and find the minimum of

H(θ)=−4cos⁡θ−2sin⁡θ+6\begin{aligned} H(\theta) = -4\cos\theta -2\sin\theta +6 \end{aligned}

Since

0=H′(θ)=4sin⁡θ−2cos⁡θ  ⟹  x=cos⁡θ=2sin⁡θ=2y\begin{aligned} 0=H'(\theta) = 4\sin\theta -2\cos\theta \implies x=\cos\theta = 2\sin\theta =2y \end{aligned}

So

1=x2+y2=4y2+y2=5y2  ⟹  y=±15, x=±25\begin{aligned} 1=x^2+y^2 = 4y^2 +y^2 =5 y^2 \implies y = \pm\frac{1}{\sqrt{5}},\ x = \pm\frac{2}{\sqrt{5}} \end{aligned}

At these two points

h=6−4x−2y=6−10y=6∓105=6∓25\begin{aligned} h = 6-4x-2y = 6 - 10y =6 \mp \frac{10}{\sqrt{5}} =6 \mp 2\sqrt{5} \end{aligned}

The minimum is 6−256-2\sqrt{5}.

한 번 더 — 비슷한 문제 풀기CLP-3 · 2.9절 · 21번
# 극값과 안장점계산보통자동 분류
39.CLP-3 · 2.9절 · 21번대학 수준우리말 번역

함수

f(x,y)=2x3−6xy+y2+4yf(x,y)=2x^3 - 6xy + y^2 +4y

를 생각하세요.

(a) f(x,y)f(x,y) 의 모든 임계점을 구하고 분류하세요. (b) 꼭짓점이 (1,0)(1,0), (0,1)(0,1), (1,1)(1,1) 인 삼각형 영역에서 f(x,y)f(x,y) 의 최댓값과 최솟값을 구하세요.

영어 원문 보기

Consider the function

f(x,y)=2x3−6xy+y2+4yf(x,y)=2x^3 - 6xy + y^2 +4y

(a) Find and classify all of the critical points of f(x,y)f(x,y). (b) Find the maximum and minimum values of f(x,y)f(x,y) in the triangle with vertices (1,0)(1,0), (0,1)(0,1) and (1,1)(1,1).

정답·풀이 보기

(a)

f=2x3−6xy+y2+4yfx=6x2−6yfxx=12xfxy=−6fy=−6x+2y+4fyy=2\begin{aligned} f&=2x^3 - 6xy + y^2 +4y \\ f_x&=6x^2-6y & f_{xx}&=12x\qquad && f_{xy}&= -6\\ f_y&=-6x+2y+4\qquad & f_{yy}&=2 \end{aligned}

이므로 임계점은 다음 식의 해이다.

fx=0fy=0  ⟺  y=x2y−3x+2=0  ⟺  y=x2x2−3x+2=0  ⟺  y=x2x=1 또는 2\begin{aligned} & & &f_x=0\qquad & &f_y=0 \\ &\iff\qquad& &y=x^2\qquad & &y-3x+2=0 \\ &\iff& &y=x^2 & &x^2-3x+2=0 \\ &\iff& &y=x^2 & &x=1\text{ 또는 }2 \end{aligned}

따라서 임계점은 (1,1), (2,4)(1,1),\ (2,4) 의 두 개이다.

임계점fxxfyy−fxy2fxx종류(1,1)12×2−(−6)2<0안장점(2,4)24×2−(−6)2>024극소\begin{array}{|c|c|c|c|}\hline \genfrac{}{}{0pt}{}{\text{임계}}{\text{점}} & f_{xx}f_{yy}-f_{xy}^2 & f_{xx} & \text{종류} \\ \hline (1,1) & 12\times 2-(-6)^2<0 & & \text{안장점} \\ \hline (2,4) & 24\times 2-(-6)^2>0 & 24 & \text{극소} \\ \hline \end{array}

(b) 허용된 영역의 내부에는 임계점이 없으므로 최댓값과 최솟값은 모두 경계에서만 나타난다. 경계는 선분 (i) x=1x=1, 0≤y≤10\le y\le 1, (ii) y=1y=1, 0≤x≤10\le x\le 1, (iii) y=1−xy=1-x, 0≤x≤10\le x\le 1 로 이루어져 있다.

그림

  • 먼저 경계 중 x=1x=1 인 부분을 살펴보자. 여기서 f=y2−2y+2f=y^2-2y+2 이다. ddy(y2−2y+2)=2y−2\frac{\mathrm{d}}{\mathrm{d}y}(y^2-2y+2)=2y-2 는 y=1y=1 에서만 00 이 되므로, 0≤y≤10\le y\le 1 에서 y2−2y+2y^2-2y+2 의 최댓값과 최솟값은 y=0y=0 일 때(f=2f=2) 또는 y=1y=1 일 때(f=1f=1)에 나타난다.
  • 다음으로 경계 중 y=1y=1 인 부분을 살펴보자. 여기서 f=2x3−6x+5f=2x^3-6x+5 이다. ddx(2x3−6x+5)=6x2−6\frac{\mathrm{d}}{\mathrm{d}x}(2x^3-6x+5)=6x^2-6 이므로, 0≤x≤10\le x\le 1 에서 2x3−6x+52x^3-6x+5 의 최댓값과 최솟값은 x=0x=0 일 때(f=5f=5) 또는 x=1x=1 일 때(f=1f=1)에 나타난다.
  • 다음으로 경계 중 y=1−xy=1-x 인 부분을 살펴보자. 여기서 f=2x3−6x(1−x)+(1−x)2+4(1−x)=2x3+7x2−12x+5f=2x^3-6x(1-x) +(1-x)^2+4(1-x)=2x^3+7x^2-12x+5 이다. ddx(2x3+7x2−12x+5)=6x2+14x−12=2(3x2+7x−6)=2(3x−2)(x+3)\frac{\mathrm{d}}{\mathrm{d}x}(2x^3+7x^2-12x+5)=6x^2+14x-12 =2\big(3x^2+7x-6\big) =2(3x-2)(x+3) 이므로, 0≤x≤10\le x\le 1 에서 2x3+7x2−12x+52x^3+7x^2-12x+5 의 최댓값과 최솟값은 x=0x=0 일 때(f=5f=5), 또는 x=1x=1 일 때(f=2f=2), 또는 x=23x=\frac{2}{3} 일 때(f=2(827)−6(23)(13)+19+43=16−36+3+3627=1927f=2(\frac{8}{27})-6(\frac{2}{3})(\frac{1}{3})+\frac{1}{9}+\frac{4}{3} =\frac{16-36+3+36}{27} =\frac{19}{27})에 나타난다.

따라서 종합하면 최댓값과 최솟값의 후보는 다음과 같으며, 최댓값과 최솟값을 표시하였다.

점(1,0)(1,1)(0,1)(23,13)함숫값 f2151927최대최소\begin{array}{|c|c|c|c|c|}\hline \text{점} & (1,0) & (1,1) & (0,1) & \big(\frac{2}{3},\frac{1}{3}\big) \\ \hline \text{함숫값 }f & 2 & 1 & 5 & \frac{19}{27} \\ \hline & & & \text{최대} & \text{최소} \\ \hline \end{array}

원본 교재 풀이(영어)

(a) Since

f=2x3−6xy+y2+4yfx=6x2−6yfxx=12xfxy=−6fy=−6x+2y+4fyy=2\begin{aligned} f&=2x^3 - 6xy + y^2 +4y \\ f_x&=6x^2-6y & f_{xx}&=12x\qquad && f_{xy}&= -6\\ f_y&=-6x+2y+4\qquad & f_{yy}&=2 \end{aligned}

the critical points are the solutions of

fx=0fy=0  ⟺  y=x2y−3x+2=0  ⟺  y=x2x2−3x+2=0  ⟺  y=x2x=1 or 2\begin{aligned} & & &f_x=0\qquad & &f_y=0 \\ &\iff\qquad& &y=x^2\qquad & &y-3x+2=0 \\ &\iff& &y=x^2 & &x^2-3x+2=0 \\ &\iff& &y=x^2 & &x=1\text{ or }2 \end{aligned}

So, there are two critical points: (1,1), (2,4)(1,1),\ (2,4).

criticalpointfxxfyy−fxy2fxxtype(1,1)12×2−(−6)2<0saddle point(2,4)24×2−(−6)2>024local min\begin{array}{|c|c|c|c|}\hline \genfrac{}{}{0pt}{}{\text{critical}}{\text{point}} & f_{xx}f_{yy}-f_{xy}^2 & f_{xx} & \text{type} \\ \hline (1,1) & 12\times 2-(-6)^2<0 & & \text{saddle point} \\ \hline (2,4) & 24\times 2-(-6)^2>0 & 24 & \text{local min} \\ \hline \end{array}

(b) There are no critical points in the interior of the allowed region, so both the maximum and the minimum occur only on the boundary. The boundary consists of the line segments (i) x=1x=1, 0≤y≤10\le y\le 1, (ii) y=1y=1, 0≤x≤10\le x\le 1 and (iii) y=1−xy=1-x, 0≤x≤10\le x\le 1.

figure

  • First, we look at the part of the boundary with x=1x=1. There f=y2−2y+2f=y^2-2y+2. As ddy(y2−2y+2)=2y−2\frac{\mathrm{d}}{\mathrm{d}y}(y^2-2y+2)=2y-2 vanishes only at y=1y=1, the max and min of y2−2y+2y^2-2y+2 for 0≤y≤10\le y\le 1 must occur either at y=0y=0, where f=2f=2, or at y=1y=1, where f=1f=1.
  • Next, we look at the part of the boundary with y=1y=1. There f=2x3−6x+5f=2x^3-6x+5. As ddx(2x3−6x+5)=6x2−6\frac{\mathrm{d}}{\mathrm{d}x}(2x^3-6x+5)=6x^2-6, the max and min of 2x3−6x+52x^3-6x+5 for 0≤x≤10\le x\le 1 must occur either at x=0x=0, where f=5f=5, or at x=1x=1, where f=1f=1.
  • Next, we look at the part of the boundary with y=1−xy=1-x. There f=2x3−6x(1−x)+(1−x)2+4(1−x)=2x3+7x2−12x+5f=2x^3-6x(1-x) +(1-x)^2+4(1-x)=2x^3+7x^2-12x+5. As ddx(2x3+7x2−12x+5)=6x2+14x−12=2(3x2+7x−6)=2(3x−2)(x+3)\frac{\mathrm{d}}{\mathrm{d}x}(2x^3+7x^2-12x+5)=6x^2+14x-12 =2\big(3x^2+7x-6\big) =2(3x-2)(x+3), the max and min of 2x3+7x2−12x+52x^3+7x^2-12x+5 for 0≤x≤10\le x\le 1 must occur either at x=0x=0, where f=5f=5, or at x=1x=1, where f=2f=2, or at x=23x=\frac{2}{3}, where f=2(827)−6(23)(13)+19+43=16−36+3+3627=1927f=2(\frac{8}{27})-6(\frac{2}{3})(\frac{1}{3})+\frac{1}{9}+\frac{4}{3} =\frac{16-36+3+36}{27} =\frac{19}{27}.

So all together, we have the following candidates for max and min, with the max and min indicated.

point(1,0)(1,1)(0,1)(23,13)value of f2151927maxmin\begin{array}{|c|c|c|c|c|}\hline \text{point} & (1,0) & (1,1) & (0,1) & \big(\frac{2}{3},\frac{1}{3}\big) \\ \hline \text{value of }f & 2 & 1 & 5 & \frac{19}{27} \\ \hline & & & \text{max} & \text{min} \\ \hline \end{array}

한 번 더 — 비슷한 문제 풀기CLP-3 · 2.9절 · 27번
# 극값과 안장점계산보통자동 분류
40.CLP-3 · 2.9절 · 22번대학 수준우리말 번역

함수 f(x,y)=x4+y4−4xy+2f(x,y)=x^4+y^4-4xy+2 의 임계점을 모두 구하고, 각 임계점이 극솟값, 극댓값, 안장점 중 어느 것인지 판단하세요.

영어 원문 보기

Find all critical points of the function f(x,y)=x4+y4−4xy+2f(x,y)=x^4+y^4-4xy+2, and for each determine whether it is a local minimum, maximum or saddle point.

정답·풀이 보기

다음과 같다.

f(x,y)=x4+y4−4xy+2fx(x,y)=4x3−4yfxx(x,y)=12x2fy(x,y)=4y3−4xfyy(x,y)=12y2fxy(x,y)=−4\begin{aligned} f(x,y)&=x^4+y^4-4xy+2\quad & f_x(x,y)&=4x^3-4y\quad & f_{xx}(x,y)&=12x^2 \\ & & f_y(x,y)&=4y^3-4x & f_{yy}(x,y)&=12y^2 \\ & & & &f_{xy}(x,y)&=-4 \end{aligned}

임계점에서는

fx(x,y)=fy(x,y)=0  ⟺  y=x3 그리고 x=y3  ⟺  x=x9 그리고 y=x3  ⟺  x(x8−1)=0, y=x3  ⟺  (x,y)=(0,0) 또는 (1,1) 또는 (−1,−1)\begin{aligned} f_x(x,y)=f_y(x,y)=0 &\iff y=x^3\text{ 그리고 }x=y^3 \\ &\iff x=x^9\text{ 그리고 }y=x^3 \\ &\iff x(x^8-1)=0,\ y=x^3 \\ &\iff (x,y)=(0,0)\text{ 또는 }(1,1)\text{ 또는 }(-1,-1) \end{aligned}

세 임계점 각각의 분류를 나타낸 표는 다음과 같다.

임계점fxxfyy−fxy2fxx종류(0,0)0×0−(−4)2<0안장점(1,1)12×12−(−4)2>012극소(−1,−1)12×12−(−4)2>012극소\begin{array}{|c|c|c|c|}\hline \genfrac{}{}{0pt}{}{\text{임계}}{\text{점}} & f_{xx}f_{yy}-f_{xy}^2 & f_{xx} & \text{종류} \\ \hline (0,0) & 0\times 0-(-4)^2<0 & & \text{안장점} \\ \hline (1,1) & 12\times 12-(-4)^2>0 & \text{12} & \text{극소} \\ \hline (-1,-1) & 12\times 12-(-4)^2>0 & \text{12} & \text{극소} \\ \hline \end{array}

원본 교재 풀이(영어)

We have

f(x,y)=x4+y4−4xy+2fx(x,y)=4x3−4yfxx(x,y)=12x2fy(x,y)=4y3−4xfyy(x,y)=12y2fxy(x,y)=−4\begin{aligned} f(x,y)&=x^4+y^4-4xy+2\quad & f_x(x,y)&=4x^3-4y\quad & f_{xx}(x,y)&=12x^2 \\ & & f_y(x,y)&=4y^3-4x & f_{yy}(x,y)&=12y^2 \\ & & & &f_{xy}(x,y)&=-4 \end{aligned}

At a critical point

fx(x,y)=fy(x,y)=0  ⟺  y=x3 and x=y3  ⟺  x=x9 and y=x3  ⟺  x(x8−1)=0, y=x3  ⟺  (x,y)=(0,0) or (1,1) or (−1,−1)\begin{aligned} f_x(x,y)=f_y(x,y)=0 &\iff y=x^3\text{ and }x=y^3 \\ &\iff x=x^9\text{ and }y=x^3 \\ &\iff x(x^8-1)=0,\ y=x^3 \\ &\iff (x,y)=(0,0)\text{ or }(1,1)\text{ or }(-1,-1) \end{aligned}

Here is a table giving the classification of each of the three critical points.

criticalpointfxxfyy−fxy2fxxtype(0,0)0×0−(−4)2<0saddle point(1,1)12×12−(−4)2>012local min(−1,−1)12×12−(−4)2>012local min\begin{array}{|c|c|c|c|}\hline \genfrac{}{}{0pt}{}{\text{critical}}{\text{point}} & f_{xx}f_{yy}-f_{xy}^2 & f_{xx} & \text{type} \\ \hline (0,0) & 0\times 0-(-4)^2<0 & & \text{saddle point} \\ \hline (1,1) & 12\times 12-(-4)^2>0 & \text{12} & \text{local min} \\ \hline (-1,-1) & 12\times 12-(-4)^2>0 & \text{12} & \text{local min} \\ \hline \end{array}

한 번 더 — 비슷한 문제 풀기CLP-3 · 2.9절 · 18번
# 극값과 안장점계산보통자동 분류