아래 네 가지 진술 각각에 대해, 그 상황이 적용되는 점을 그림에서 모두 찾아 그 글자에 동그라미를 치세요.
예를 들어 진술이 "이 점들은 y–축 위에 있다"라면 P 와 U 에 동그라미를 치고 나머지 글자에는 치지 않는다.
점 T 에서 극댓값이 생긴다고 가정해도 됩니다.
(i) (ii) (iii) (iv) ∇f가영벡터이다f가안장점을갖는다편도함수fy가양수이다f의방향⟨0,−1⟩으로의방향도함수가음수이다P Q R S T UP Q R S T UP Q R S T UP Q R S T U
(b) 아래 그림은 xz–축 위에 그린 그래프 z=F(x,y) 의 세 개의 "y 단면"을 보여 준다. (곧, 곡면 z=F(x,y) 와 세 평면 (y=1.9, y=2, y=2.1)의 교선이다.) 각 진술에 대해 알맞은 말에 동그라미를 치세요.
(i) (ii) (iii) 1계편도함수Fx(1,2)는F는(2,2)에서임계점을갖는다 2계편도함수Fxy(1,2)는양수/음수/0 (하나에동그라미)참/거짓 (하나에동그라미)양수/음수/0 (하나에동그라미)
영어 원문 보기
(a) Some level curves of a function f(x,y) are plotted in the xy–plane
below.
For each of the four statements below, circle the letters of
all points in the diagram where the situation applies.
For example, if the statement were “These points are on the y–axis”, you would circle both P and U, but none of the other letters.
You may assume that a local maximum occurs at point T.
(i) (ii) (iii) (iv) ∇f is zerof has a saddle point the partial derivative fy is positive the directional derivative of f in the direction ⟨0,−1⟩ is negativeP Q R S T UP Q R S T UP Q R S T UP Q R S T U
(b) The diagram below shows three “y traces” of a graph z=F(x,y) plotted
on xz–axes. (Namely the intersections of the surface z=F(x,y) with the
three planes (y=1.9, y=2, y=2.1). For each statement below, circle the
correct word.
(i) (ii) (iii) the first order partial derivative Fx(1,2) isF has a critical point at (2,2) the second order partial derivative Fxy(1,2) ispositive/negative/zero (circle one)true/false (circle one)positive/negative/zero (circle one)
정답·풀이 보기
a) (ⅰ) 임계점에서 ∇f 는 영벡터이다.
점 T 는 극댓값을 갖는 점이고 점 U 는 안장점이다. 나머지 점 P, R, S 는 임계점이 아니다.
(a) (ⅱ) 안장점은 U 뿐이다.
(a) (ⅲ) (x,y) 에서 수직 위쪽으로 움직일 때 f 가 증가하면 fy(x,y)>0 이다. 그림을 보면 다음과 같다.
fy(P)<0fy(Q)<0fy(R)=0fy(S)>0fy(T)=0fy(U)=0
따라서 조건에 맞는 점은 S 뿐이다.
(a) (ⅳ) f 의 방향 ⟨0,−1⟩ 으로의 방향도함수는
∇f⋅⟨0,−1⟩=−fy 이다. 이 값이 음수일 필요충분조건은 fy>0 이다. 따라서 이번에도 조건에 맞는 점은 S 뿐이다.
(b) (ⅰ) 그림에서 y=2.0 의 그래프는 x=1 에서 기울기가 양수이므로,
함수 z=F(x,2) 는 x=1 에서 증가한다.
따라서 Fx(1,2)>0 이다.
(b) (ⅱ) 그림에서 y=2.0 의 그래프는 x=2 에서 기울기가 양수이므로,
함수 z=F(x,2) 는 x=2 에서도 (천천히이지만) 증가한다.
따라서 Fx(2,2)>0 이다. 그러므로 F 는 (2,2) 에서 임계점을 갖지 않는다.
(b) (ⅲ) 그림으로 보아
Fx(1,1.9)>Fx(1,2.0)>Fx(1,2.1) 인 것으로 보인다.
곧, x=1 에서 y=1.9 그래프의 기울기가 x=1 에서 y=2.0 그래프의 기울기보다 크고, 이 기울기는 다시 x=1 에서 y=2.1 그래프의 기울기보다 큰 것으로 보인다.
따라서 y 가 y=2 를 지나며 증가할 때 Fx(1,y) 는 감소하는 것으로 보이고, 그러므로 Fxy(1,2)<0 이다.
원본 교재 풀이(영어)
a) (i) ∇f is zero at critical points.
The point T is a local maximum and the point U is
a saddle point. The remaining points P, R, S, are not
critical points.
(a) (ii) Only U is a saddle point.
(a) (iii) We have fy(x,y)>0 if f increases as you move vertically upward
through (x,y). Looking at the diagram, we see
fy(P)<0fy(Q)<0fy(R)=0fy(S)>0fy(T)=0fy(U)=0
So only S works.
(a) (iv) The directional derivative of f in the direction ⟨0,−1⟩
is ∇f⋅⟨0,−1⟩=−fy. It is negative if and
only if fy>0. So, again, only S works.
(b) (i) The function z=F(x,2) is increasing at x=1,
because the y=2.0 graph in the diagram has positive slope at x=1.
So Fx(1,2)>0.
(b) (ii) The function z=F(x,2) is also increasing (though slowly) at x=2,
because the y=2.0 graph in the diagram has positive slope at x=2.
So Fx(2,2)>0. So F does not have a critical point
at (2,2).
(b) (iii) From the diagram the looks like
Fx(1,1.9)>Fx(1,2.0)>Fx(1,2.1).
That is, it looks like the slope of the y=1.9 graph at x=1
is larger than the slope of the y=2.0 graph at x=1,
which in turn
is larger than the slope of the y=2.1 graph at x=1.
So it looks like Fx(1,y) decreases as y increases through y=2,
and consequently Fxy(1,2)<0.
(x,y) 가 정사각형 영역 ∣x∣≤1, ∣y∣≤1 에서 변할 때, 곡면 z=x2+y2 의 가장 높은 점과 가장 낮은 점을 구하세요. 그 점들에서 zx,zy 의 값에 대해 논하세요. 답하는 과정에서 도함수를 구하지 마세요.
영어 원문 보기
Find the high and low points of the surface z=x2+y2 with (x,y)
varying over the square ∣x∣≤1, ∣y∣≤1. Discuss the values of
zx,zy there. Do not evaluate any derivatives in answering this
question.
정답·풀이 보기
(x,y) 에서의 높이 x2+y2 은 (x,y) 에서 (0,0) 까지의 거리이다. 따라서 최소 높이는 (0,0,0) 에서 0이다. 이 곡면은 원뿔이다. 원뿔은 (0,0,0) 에서 뾰족하며, 그 점에서 미분계수 zx 와 zy 는 존재하지 않는다.
최대 높이는 (x,y) 가 (0,0) 에서 가능한 한 멀리 있을 때 얻어진다. 가장 높은 점은 (±1,±1,2) 이다. 이 점들에서 zx 와 zy 는 존재하지만 0이 아니다. ∣x∣,∣y∣≤1 이라는 제한이 없다면 이 점들은 가장 높은 점이 아닐 것이다.
원본 교재 풀이(영어)
The height x2+y2 at (x,y) is the distance from (x,y)
to (0,0). So the minimum height is zero at (0,0,0). The surface is a
cone. The cone has a point at (0,0,0) and the derivatives
zx and zy do not exist there.
The maximum height is achieved when (x,y) is as far as possible from
(0,0). The highest points are at (±1,±1,2). There
zx and zy exist but are not zero. These points would not
be the highest points if it were not for the restriction ∣x∣,∣y∣≤1.
한 변수 매끄러운 함수 f(t) (t 는 모든 실수 값을 가진다)에 대하여 t0 이 극솟값 또는 극댓값을 주는 점이면 f′(t0)=0 이다.
직선 x=a+td 위의 점들로 제한한 매끄러운 함수 g(x) 가 x0 에서 극솟값 또는 극댓값을 갖기 위한 이와 유사한 필요조건을 유도하세요.
이 조건에는 g(x) 의 그래디언트가 들어가야 합니다.
영어 원문 보기
If t0 is a local minimum or maximum of the smooth function f(t)
of one variable (t runs over all real numbers) then f′(t0)=0.
Derive an analogous necessary condition for x0 to be a local minimum
or maximium of the smooth function g(x)restricted to points on
the line x=a+td. The test should involve the gradient
of g(x).
정답·풀이 보기
f(t)=g(a+td) 로 정의하고, x0=a+t0d 가 되도록 t0 을 정한다. 그러면 f′(t)=∇g(a+td)⋅d 이다.
이를 확인하기 위해 a=⟨a1,a2,a3⟩, d=⟨d1,d2,d3⟩ 로 쓰자.
그러면
이다. 그러면 x0 이 주어진 직선으로 제한한 g 의 극댓값 또는 극솟값을 주는 점일 필요충분조건은 t0 이 f(t) 의 극댓값 또는 극솟값을 주는 점인 것이다. 그렇다면 f′(t0) 은 반드시 0 이 된다. 따라서 x0 이 주어진 직선으로 제한한 g 의 극댓값 또는 극솟값을 주는 점이면
∇g(x0)⋅d=0, 즉 ∇g(x0)⊥d 이고, 어떤 t0 에 대해 x0=a+t0d 이다.
두 번째 조건은 x0 이 직선 위에 있음을 보장하기 위한 것이다.
원본 교재 풀이(영어)
Define f(t)=g(a+td) and determine t0 by
x0=a+t0d. Then f′(t)=∇g(a+td)⋅d.
To see this, write a=⟨a1,a2,a3⟩ and d=⟨d1,d2,d3⟩.
Then
Then x0 is a local
max or min of the restriction of g to the specified line if and only
if t0 is a local max or min of f(t). If so, f′(t0) necessarily
vanishes. So if x0 is a local
max or min of the restriction of g to the specified line,
then ∇g(x0)⋅d=0, i.e. ∇g(x0)⊥d, and x0=a+t0d for some t0.
The second condition is to ensure that x0 lies on the line.
As fx(0,0)=fy(0,0)=0, we have that (0,0) is always a critical point
for f. According to the Second Derivative Test, (0,0) is also a saddle point
for f if
fxx(0,0)fyy(0,0)−fxy(0,0)2<0⟺4−c2<0⟺∣c∣>2
As a remark, the Second Derivative Test provides no information
when the expression
fxx(0,0)fyy(0,0)−fxy(0,0)2=0, i.e. when c=±2.
But when c=±2,
f(x,y)=x2±2xy+y2=(x±y)2
and f has a local minimum, not a saddle point, at (0,0).
평면 2x+y+z=5 중에서 x≥0, y≥0, z≥0 인 부분에서 x2y2z 의 최댓값과 최솟값을 구하세요.
또한 그 극값이 나타나는 모든 점을 구하세요.
영어 원문 보기
Find the largest and smallest values of x2y2z in the part of the
plane 2x+y+z=5 where x≥0, y≥0 and z≥0.
Also find all points where those extreme values occur.
정답·풀이 보기
생각하는 영역은 다음과 같다.
D={(x,y,z)x≥0,y≥0,z≥0,2x+y+z=5}
먼저 이 영역의 경계에서는 x, y, z 중 적어도 하나가 0 임에 주목한다. 따라서 f(x,y,z)=x2y2z 는 경계에서 0 이다.
D 의 경계가 아닌 모든 점에서 f 의 값은 0 보다 크므로, f 의 최솟값은 0 이고 그 값은 다음 집합의 모든 점에서 나타난다.
First observe that, on the boundary of this region, at least one of
x, y and z is zero. So f(x,y,z)=x2y2z is zero on the boundary.
As f takes values which are strictly bigger than zero at all points of D
that are not on the boundary, the minimum value of f is 0 on
∂D={(x,y,z)x≥0,y≥0,z≥0,2x+y+z=5,at least one of x,y,z zero}
The maximum value of f will be taken at a critical point.
On D
3x2y=1 이면 x=0 일 수 없으므로 2x2y=1 이어야 한다. 두 식을
나누면 1=2x2y3x2y=23 이 되어 불가능하다.
따라서 정사각형 안의 임계점은 (0,0) 뿐이다. 그 점에서 f=0 이다.
다음으로 경계 중 x=0 인 부분을 살펴본다. 그 위에서 f=0 이다.
다음으로 경계 중 y=0 인 부분을 살펴본다. 그 위에서 f=0 이다.
다음으로 경계 중 x=1 인 부분을 살펴본다. 그 위에서 f=y−y2 이다.
dyd(y−y2)=1−2y 이므로, 0≤y≤1 에서 y−y2 의 최댓값과 최솟값은
y=0 (이때 f=0) 또는 y=21 (이때 f=41)
또는 y=1 (이때 f=0) 에서만 나타날 수 있다.
다음으로 경계 중 y=1 인 부분을 살펴본다. 그 위에서 f=x−x3 이다.
dxd(x−x3)=1−3x2 이므로, 0≤x≤1 에서 x−x3 의 최댓값과 최솟값은
x=0 (이때 f=0) 또는
x=31 (이때 f=332)
또는 x=1 (이때 f=0) 에서만 나타날 수 있다.
The specified function and its first order derivatives are
f(x,y)=xy−x3y2fx(x,y)=y−3x2y2fy(x,y)=x−2x3y
First, we find the critical points.
fxfy=0=0⟺⟺y(1−3x2y)x(1−2x2y)=0=0⟺⟺y=0 or 3x2y=1x=0 or 2x2y=1
If y=0, we cannot have 2x2y=1, so we must have x=0.
If 3x2y=1, we cannot have x=0, so we must have 2x2y=1. Dividing
gives 1=2x2y3x2y=23 which is impossible.
So the only critical point in the square is (0,0). There f=0.
Next, we look at the part of the boundary with x=0. There f=0.
Next, we look at the part of the boundary with y=0. There f=0.
Next, we look at the part of the boundary with x=1. There f=y−y2.
As dyd(y−y2)=1−2y, the max and min of y−y2 for
0≤y≤1 must occur either at y=0, where f=0, or at y=21,
where f=41, or at y=1, where f=0.
Next, we look at the part of the boundary with y=1. There f=x−x3.
As dxd(x−x3)=1−3x2, the max and min of x−x3 for
0≤x≤1 must occur either at x=0, where f=0, or
at x=31, where f=332,
or at x=1, where f=0.
All together, we have the following candidates for max and min.
pointvalue of f(0,0)0minx=00miny=00min(1,0)0min(1,21)41(1,1)0min(0,1)0min(31,1)332max(1,1)0min
The largest and smallest values of f in this table are
x+y 는 0이 될 수 없으므로 x=y 이고, 따라서 x=y=±21 이다.
그러므로 임계점은 (21,21) 과 (−21,−21) 뿐이다.
경계에서는 x=cosθ, y=sinθ 이므로
T=(cosθ+sinθ)e−1 이다.
이 함수는 주기함수이므로 최댓값과 최솟값은
dθdT=(−sinθ+cosθ)e−1 이 0이 되는 곳에서 나타난다. 즉
sinθ=cosθ 일 때이고,
따라서 sinθ=cosθ=±21 이다.
As x+y may not vanish, this forces x=y and then x=y=±21.
So the only critical points are (21,21) and (−21,−21).
On the boundary x=cosθ and y=sinθ,
so T=(cosθ+sinθ)e−1.
This is a periodic function and so takes its max and min at zeroes of
dθdT=(−sinθ+cosθ)e−1. That is,
when sinθ=cosθ,
which forces sinθ=cosθ=±21.
All together, we have the following candidates for max and min.
pointvalue of T(21,21)e1≈0.61max(−21,−21)−e1min(21,21)e2≈0.52(−21,−21)−e2
The largest and smallest values of T in this table are
아래 그림들은 목록에 있는 함수들의 등위집합 f(x,y)=c 를 높이
c=0,0.1,0.2,…,1.9,2 에서 나타낸 것입니다.
각 그림에 해당하는 함수를 짝지어 쓰고, 각 그림에 임계점을 표시하세요. (경우에 따라 임계점이 그림에
이미 그려져 있지 않을 수도 있습니다. 그런 경우에는 직접 그림에 추가하세요.)
The images below depict level sets f(x,y)=c of the functions in the list at heights
c=0,0.1,0.2,…,1.9,2.
Label the pictures with the corresponding function and mark the critical points in each
picture. (Note that in some cases, the critical points might not be drawn on the images
already. In those cases you should add them to the picture.)
(i) f(x,y)=(x2+y2−1)(x−y)+1
(ii) f(x,y)=x2+y2
(iii) f(x,y)=y(x+y)(x−y)+1
(iv) f(x,y)=x2+y2
정답·풀이 보기
두 함수 f(x,y)=x2+y2 (즉 (ⅱ))와
f(x,y)=x2+y2 (즉 (ⅳ))은 모두 (0,0) 을 중심으로 한 회전에 대해 변하지 않는다.
따라서 이 함수들의 등위선은 원점을 중심으로 하는 원이다. 극좌표에서 x2+y2 은 r 이다.
그러므로 (ⅱ)의 함수에 대해 그려진 등위선은
r=0,0.1,0.2,…,1.9,2 이다. 이들은 간격이 일정하다.
따라서 이 시점에서 세 번째 그림은 (ⅳ)에,
네 번째 그림은 (ⅱ)에 해당함을 알 수 있다.
직선 x=y, x=−y, y=0 은 모두 함수 f(x,y)=y(x+y)(x−y)+1 (즉 (ⅲ))의
f=1 인 등위선임에 주목하자. 따라서 첫 번째 그림은 (ⅲ)에 해당한다. 그러면 두 번째 그림은
(ⅰ)에 해당한다.
다음은 임계점을 표시한 그림들이다.
등위선이 서로 교차하는 곳에는 안장점이 있고,
“과녁 모양”의 중심에는 극대점 또는 극소점이 있다.
(ⅰ)
(ⅱ)
(ⅲ)
(ⅳ)
원본 교재 풀이(영어)
Both of the functions f(x,y)=x2+y2 (i.e. (ii))
and f(x,y)=x2+y2 (i.e. (iv)) are invariant under rotations
around the (0,0). So their level curves are circles centred on
the origin. In polar coordinates x2+y2 is r.
So the sketched level curves of the function in (ii) are
r=0,0.1,0.2,…,1.9,2. They are equally spaced.
So at this point, we know that the third picture goes with (iv)
and the fourth picture goes with (ii).
Notice that the lines x=y, x=−y and y=0 are all level curves
of the function f(x,y)=y(x+y)(x−y)+1 (i.e. of (iii))
with f=1. So the first picture goes with (iii). And the second picture
goes with (i).
Here are the pictures with critical points marked on them.
There are saddle points where level curves cross and there
are local max's or min's at “bull's eyes”.
The maximum and minimum must either occur at a critical point or on
the boundary of R.
The critical points are the solutions of
00=fx(x,y)=2−2x=fy(x,y)=−8y
So the only critical point is (1,0).
On the side x=−1, −1≤y≤1 of the boundary of R
f(−1,y)=2−4y2
This function decreases as ∣y∣ increases. So its maximum value
on −1≤y≤1 is achieved at y=0 and its minimum value is achieved
at y=±1.
On the side x=3, −1≤y≤1 of the boundary of R
f(3,y)=2−4y2
This function decreases as ∣y∣ increases. So its maximum value
on −1≤y≤1 is achieved at y=0 and its minimum value is achieved
at y=±1.
On both sides y=±1, −1≤x≤3 of the boundary of R
f(x,±1)=1+2x−x2=2−(x−1)2
This function decreases as ∣x−1∣ increases. So its maximum value
on −1≤x≤3 is achieved at x=1 and its minimum value is achieved
at x=3 and x=−1 (both of whom are a distance 2 from x=1).
So we have the following candidates for the locations of the min and max
pointvalue of f(1,0)6max(−1,0)2(1,±1)2(−1,±1)−2min(3,0)2(3,±1)−2min
닫힌 유계 정의역 x2+y2≤1 에서 함수 h(x,y)=−4x−2y+6 의 최솟값을 구하세요.
영어 원문 보기
Find the minimum of the function h(x,y)=−4x−2y+6 on the closed
bounded domain defined by x2+y2≤1.
답 쓰고 채점
정답·풀이 보기
∇h=⟨−4,−2⟩ 는 결코 영이 되지 않으므로 h 는 임계점을 갖지 않고, 원판 x2+y2≤1 에서 h 의 최솟값은 원판의 경계 x2+y2=1 에서 나타나야 한다. 경계에서의 최솟값을 구하기 위해 x2+y2≤1 을 x=cosθ, y=sinθ 로 매개변수화하고 다음의 최솟값을 구한다.
H(θ)=−4cosθ−2sinθ+6
다음이 성립하므로
0=H′(θ)=4sinθ−2cosθ⟹x=cosθ=2sinθ=2y
따라서
1=x2+y2=4y2+y2=5y2⟹y=±51,x=±52
이 두 점에서
h=6−4x−2y=6−10y=6∓510=6∓25
이다. 최솟값은 6−25 이다.
원본 교재 풀이(영어)
Since ∇h=⟨−4,−2⟩ is never zero,
h has no critical points and the minimum of h on the disk
x2+y2≤1 must be taken on the boundary, x2+y2=1, of the
disk. To find the minimum on the boundary, we parametrize x2+y2≤1
by x=cosθ, y=sinθ and find the minimum of
(a) f(x,y) 의 모든 임계점을 구하고 분류하세요.
(b) 꼭짓점이 (1,0), (0,1), (1,1) 인 삼각형 영역에서 f(x,y) 의 최댓값과 최솟값을 구하세요.
영어 원문 보기
Consider the function
f(x,y)=2x3−6xy+y2+4y
(a) Find and classify all of the critical points of f(x,y).
(b) Find the maximum and minimum values of f(x,y) in the
triangle with vertices (1,0), (0,1) and (1,1).
(b)
허용된 영역의 내부에는 임계점이 없으므로 최댓값과 최솟값은 모두 경계에서만 나타난다. 경계는 선분 (i) x=1, 0≤y≤1, (ii) y=1, 0≤x≤1, (iii) y=1−x, 0≤x≤1 로 이루어져 있다.
먼저 경계 중 x=1 인 부분을 살펴보자. 여기서 f=y2−2y+2 이다.
dyd(y2−2y+2)=2y−2 는 y=1 에서만 0 이 되므로,
0≤y≤1 에서 y2−2y+2 의 최댓값과 최솟값은 y=0 일 때(f=2) 또는 y=1 일 때(f=1)에 나타난다.
다음으로 경계 중 y=1 인 부분을 살펴보자. 여기서 f=2x3−6x+5 이다.
dxd(2x3−6x+5)=6x2−6 이므로,
0≤x≤1 에서 2x3−6x+5 의 최댓값과 최솟값은 x=0 일 때(f=5) 또는 x=1 일 때(f=1)에 나타난다.
다음으로 경계 중 y=1−x 인 부분을 살펴보자. 여기서 f=2x3−6x(1−x)+(1−x)2+4(1−x)=2x3+7x2−12x+5 이다.
dxd(2x3+7x2−12x+5)=6x2+14x−12=2(3x2+7x−6)=2(3x−2)(x+3) 이므로,
0≤x≤1 에서 2x3+7x2−12x+5 의 최댓값과 최솟값은 x=0 일 때(f=5), 또는 x=1 일 때(f=2), 또는 x=32 일 때(f=2(278)−6(32)(31)+91+34=2716−36+3+36=2719)에 나타난다.
(b)
There are no critical points in the interior of the allowed region,
so both the maximum and the minimum occur only on the boundary. The boundary
consists of the line segments (i) x=1, 0≤y≤1, (ii) y=1, 0≤x≤1 and (iii) y=1−x, 0≤x≤1.
First, we look at the part of the boundary with x=1. There f=y2−2y+2.
As dyd(y2−2y+2)=2y−2 vanishes only at y=1,
the max and min of y2−2y+2 for 0≤y≤1 must occur either at y=0,
where f=2, or at y=1, where f=1.
Next, we look at the part of the boundary with y=1. There f=2x3−6x+5.
As dxd(2x3−6x+5)=6x2−6,
the max and min of 2x3−6x+5 for 0≤x≤1 must occur either at x=0,
where f=5, or at x=1, where f=1.
Next, we look at the part of the boundary with y=1−x. There f=2x3−6x(1−x)+(1−x)2+4(1−x)=2x3+7x2−12x+5.
As dxd(2x3+7x2−12x+5)=6x2+14x−12=2(3x2+7x−6)=2(3x−2)(x+3),
the max and min of 2x3+7x2−12x+5 for 0≤x≤1 must occur either at x=0,
where f=5, or at x=1, where f=2, or at x=32, where f=2(278)−6(32)(31)+91+34=2716−36+3+36=2719.
So all together, we have the following candidates for max and min, with the
max and min indicated.
pointvalue of f(1,0)2(1,1)1(0,1)5max(32,31)2719min