In the figure on the below, the more darkly shaded region
is part of z=1−y and the more lightly shaded region is part
of z=2−x−y.
In R, z runs from 0 (for example (0,1,0) is in R)
to 1 (for example (0,0,1) is in R).
For each fixed 0≤z≤1, (x,y) runs over
Dz={(x,y)0≤x,y≤1,y≥1−z,x+y≤2−z}
Here is a sketch of a top view of Dz.
On Dz, y runs from 1−z to 1.
For each fixed 0≤z≤1 and 1−z≤y≤1, x runs from 0
to 2−y−z.
So the specified integral is
∭RydV=∫01dz∬Dzdxdyy=∫01dz∫1−z1dy∫02−y−zdxy=∫01dz∫1−z1dyy(2−y−z)=−∫01dz∫z0du(1−u)(1+u−z) where u=1−y=∫01dz∫0zdu(1−u2−z+uz)=∫01dz(z−3z3−z2+2z3)=21−121−31+81=245
For each of the following, express the given iterated integral as an
iterated integral in which the integrations are performed in the order:
first z, then y, then x.
(a) E 의 3차원 그림을 상당히 정확하게 그리세요.
(b) 삼중적분 ∭EfdV 를 다음 순서의 하나 이상의 반복 삼중적분으로 다시 나타내세요.
∫y=y=∫x=x=∫z=z=f(x,y,z)dzdxdy
영어 원문 보기
A triple integral ∭EfdV is given in
iterated form by
∫y=−1y=1∫z=0z=1−y2∫x=02−y−zf(x,y,z)dxdzdy
(a) Draw a reasonably accurate picture of E in 3–dimensions.
(b) Rewrite the triple integral ∭EfdV as one or more
iterated triple integrals in the order
∫y=y=∫x=x=∫z=z=f(x,y,z)dzdxdy
정답·풀이 보기
(a) 주어진 적분의 적분 영역에서
y 는 −1 에서 1 까지 변하고,
그 범위의 각 고정된 y 에 대해 z 는 0 에서 1−y2 까지 변하며,
위와 같이 고정된 각 y 와 z 에 대해 x 는 0 에서 2−y−z 까지 변한다.
즉,
E={(x,y,z)−1≤y≤1,0≤z≤1−y2,0≤x≤2−y−z}
이다.
곡면 z=1−y2 의 x 가 상수인 각 단면은 위로 볼록한 포물선이다. 따라서 곡면 z=1−y2 은 포물선 z=1−y2 을 앞에서 뒤로 여러 장 쌓아 놓은 모양이다. 아래 왼쪽 그림은 z=1−y2 의 개형을 보여 준다.
곡면 x=2−y−z, 즉 x+y+z=2 는 평면이다. 이 평면은 세 점 (2,0,0), (0,2,0), (0,0,2) 를 지난다. 아래 오른쪽 그림에 이 평면이 그려져 있다. 적분 영역이 y=−1 까지 뻗어 있음을 알고 있으므로, 그림에는 평면 중 x≥0, y≥−1, z≥0 인 부분을 포함시켰다.
영역 E 는 평면 x+y+z=2 를 이용해 "터널" 0≤z≤1−y2 의 앞부분을 잘라 내어 만든 것이다. 아래 그림에서 빨간색으로 윤곽을 그려 놓았다.
(b) 바깥쪽 적분은 y 에 대한 적분(주어진 적분과 같음), 가운데 적분은 x 에 대한 적분, 안쪽 적분은 z 에 대한 적분이 되도록 적분 순서를 바꾸어야 한다.
여전히 y 는 −1 에서 1 까지 변한다.
그 범위의 각 고정된 y 에 대해 (x,z) 는 다음 영역 위를 움직인다.
Ey={(x,z)0≤z≤1−y2,0≤x+z≤2−y}
Ey 에서 x 의 최댓값은 2−y 이며, z=0 일 때 이 값을 갖는다. 아래 그림에서도 이를 확인할 수 있다. 그림에서 색칠한 영역이 Ey 이다.
위와 같이 고정된 각 x 와 y 에 대해 z 는 다음 범위를 움직인다.
Ex,y={z0≤z≤1−y2,0≤z≤2−x−y}
즉, z 는 0 에서 1−y2 과 2−x−y 중 작은 쪽까지 변한다. 1−y2≤2−x−y 일 필요충분조건은 x≤1+y2−y 임에 주의한다.
따라서 0≤x≤1+y2−y 이면 z 는 0 에서 1−y2 까지 변하고, 1+y2−y≤x≤2−y 이면 z 는 0 에서 2−x−y 까지 변한다.
(a) In the domain of integration for the given integral
y runs from −1 to 1, and
for each fixed y in that range z runs from 0 to 1−y2, and
for each fixed y and z as above, x runs from 0 to 2−y−z.
That is,
E={(x,y,z)−1≤y≤1,0≤z≤1−y2,0≤x≤2−y−z}
Each constant x cross–section of the surface z=1−y2 is an upside
down parabola. So the surface z=1−y2 consists of a bunch of copies of the
parabola z=1−y2 stacked front to back. The figure of the left below
provides a sketch of z=1−y2.
The surface x=2−y−z, or equivalently, x+y+z=2 is a plane.
It passes through the points (2,0,0), (0,2,0) and (0,0,2).
It is sketched in the figure on the right below. We know that our
domain of integration extends to y=−1, so we have chosen to include
in the sketch the part of the plane in x≥0, y≥−1, z≥0.
The domain E is constructed by using the plane x+y+z=2
to chop the front off of the “tunnel” 0≤z≤1−y2.
It is outlined in red in the figure below.
(b) We are to change the order of integration so that the outside
integral is over y (the same as the given integral),
the middle integral is over x, and the inside integral is over
over z.
We still have y running from −1 to 1.
For each fixed y in that range, (x,z) runs over
Ey={(x,z)0≤z≤1−y2,0≤x+z≤2−y}
The biggest value of x in Ey is 2−y. It is achieved
when z=0. You can also see this in the figure below.
The shaded region in that figure is Ey.
For each fixed x and y as above, z runs over
Ex,y={z0≤z≤1−y2,0≤z≤2−x−y}
That is, z runs from 0 to the smaller of
1−y2 and 2−x−y. Note that 1−y2≤2−x−y
if and only if x≤1+y2−y.
So if 0≤x≤1+y2−y, z runs from 0 to 1−y2
and if 1+y2−y≤x≤2−y, z runs from 0 to 2−x−y.
(a) 3차원에서 정의역 E 의 그림을 그리세요.
(b) 이 적분을 다음 꼴의 하나 이상의 반복적분으로 다시 나타내세요.
J=∫y=y=∫x=x=∫z=z=f(x,y,z)dzdxdy
영어 원문 보기
A triple integral ∭Ef(x,y,z)dV is given in the
iterated form
J=∫01∫01−2x∫04−2x−4zf(x,y,z)dydzdx
(a) Sketch the domain E in 3–dimensions.
(b) Rewrite the integral as one or more iterated integrals in the form
J=∫y=y=∫x=x=∫z=z=f(x,y,z)dzdxdy
정답·풀이 보기
(a) 주어진 적분 J 에서
x 는 0 에서 1 까지 변하고,
그 범위의 각 고정된 x 에 대해 z 는 0 에서 1−2x 까지 변하며,
위와 같은 각 고정된 x 와 z 에 대해 y 는 0 에서 4−2x−4z 까지 변한다.
따라서
E={(x,y,z)0≤x≤1,0≤z≤1−2x,0≤y≤4−2x−4z}
이다.
조건 y≤4−2x−4z 는 z≤1−2x−4y 로 다시 쓸 수 있다. y≥0 일 때 이로부터 z≤1−2x 가 성립하므로, E 의 기술에서 조건 z≤1−2x 를 뺄 수 있다.
E={(x,y,z)0≤x≤1,0≤y≤4−2x−4z,z≥0}
먼저 E 가 어떤 모양인지 알아보자.
평면 2x+y+4z=4 는 x축, y축, z축과 각각 (2,0,0), (0,4,0), (0,0,1) 에서 만난다.
이 평면은 아래 왼쪽 그림에 나타나 있다.
점들의 집합 {(x,y,z)x,y,z≥0,y≤4−2x−4z} 은 굵은 선으로 윤곽이 그려져 있다.
따라서 이제 조건 x≤1 만 더하면 되는데, 이 조건은 사면체의 앞부분을 잘라낸다. 이것은 위 오른쪽 그림에 나타나 있다. 다음은 E 를 깔끔하게 정리한 그림이다.
(b)
바깥쪽 적분은 y 에 대해, 가운데 적분은 x 에 대해, 안쪽 적분은 z 에 대해 하도록 적분 순서를 바꾸어야 한다. 아래 그림을 보면
다음을 알 수 있다.
y 는 0 에서 4 까지 변하고,
그 범위의 각 고정된 y 에 대해 (x,z) 는 다음 집합 위를 움직인다.
{(x,z)0≤x≤1,2x+4z≤4−y,z≥0}
0 과 2 사이의 각 고정된 y 에 대해 (위 그림에서 왼쪽 색칠된 부분)
x 는 0 에서 1 까지 변하고, 그다음
그 범위의 각 고정된 x 에 대해 z 는 0 에서 44−2x−y 까지 변한다.
2 와 4 사이의 각 고정된 y 에 대해 (위 그림에서 오른쪽 색칠된 부분)
x 는 0 에서 24−y 까지 변하고 (평면 2x+y+4z=4 와 xy평면의 교선은 z=0, 2x+y=4 이다), 그다음
for each fixed x in that range, z runs from 0 to 1−2x, and
for each fixed x and z as above, y runs from 0 to 4−2x−4z.
So
E={(x,y,z)0≤x≤1,0≤z≤1−2x,0≤y≤4−2x−4z}
Notice that the condition y≤4−2x−4z can be rewritten
as z≤1−2x−4y. When y≥0, this implies
that z≤1−2x, so that we can drop the condition
z≤1−2x from our description of E:
E={(x,y,z)0≤x≤1,0≤y≤4−2x−4z,z≥0}
First, we figure out what E looks like.
The plane 2x+y+4z=4 intersects the x–, y– and z–axes
at (2,0,0), (0,4,0) and (0,0,1), respectively.
That plane is shown in the sketch on the left below.
The set of points {(x,y,z)x,y,z≥0,y≤4−2x−4z}
is outlined with heavy lines.
So it only remains to impose the condtion x≤1, which chops off
the front bit of the tetrahedron. This is done in the sketch on the
right above. Here is a cleaned up sketch of E.
(b)
We are to reorder the integration so that the outside integral
is over y, the middle integral is over x, and the inside integral
is over z. Looking at the figure below,
we see that
y runs from 0 to 4, and
for each fixed y in that range, (x,z) runs over
{(x,z)0≤x≤1,2x+4z≤4−y,z≥0}
for each fixed y between 0 and 2 (as in the left hand shaded bit in
the figure above)
x runs from 0 to 1, and then
for each fixed x in that range, z runs from 0 to 44−2x−y.
for each fixed y between 2 and 4 (as in the right hand shaded bit in
the figure above)
x runs from 0 to 24−y (the line of intersection of the
plane 2x+y+4z=4 and the xy–plane is z=0, 2x+y=4), and then
for each fixed x in that range, z runs from 0 to 44−2x−y.
First we have to get some idea as to what E looks like.
Here is a sketch.
We are going to need the equation of the plane that contains the
points (−1,0,0), (0,−2,0) and (0,0,3). This plane does not contain
the origin and so has an equation of the form ax+by+cz=1.
(−1,0,0) lies on the plane ax+by+cz=1 if and only if
a(−1)+b(0)+c(0)=1. So a=−1.
(0,−2,0) lies on the plane ax+by+cz=1 if and only if
a(0)+b(−2)+c(0)=1. So b=−21.
(0,0,3) lies on the plane ax+by+cz=1 if and only if
a(0)+b(0)+c(3)=1. So c=31.
So the plane that contains the points (−1,0,0), (0,−2,0) and (0,0,3)
is −x−2y+3z=1.
We can now get a detailed mathematical description of E.
A point (x,y,z) is in E if and only if
(x,y,z) lies above the xy–plane, i.e. z≥0, and
(x,y,z) lies to the left of the xz–plane, i.e. y≤0, and
(x,y,z) lies behind the yz–plane, i.e. x≤0, and
(x,y,z) lies on the same side of the plane
−x−2y+3z=1 as the origin.
That is −x−2y+3z≤1. (Go ahead and check
that (0,0,0) obeys this inequality.)
So
E={(x,y,z)x≤0,y≤0,z≥0,−x−2y+3z≤1}
(a) Note that we want the outside integral to be the x–integral.
On E
x runs from −1 to 0 and
for each fixed x in that range (y,z) runs over
Ex={(y,z)y≤0,z≥0,−2y+3z≤1+x}
Here is a sketch of Ex.
On Ex, y runs from −2(1+x) to 0 and
for each fixed such y, z runs from 0 to 3(1+x+y/2)
삼중적분 ∭ExdV 의 값을 구하세요. 여기서 E 는
포물기둥 y=x2 과
평면 y+z=1, x=0, z=0 으로 둘러싸인 제1팔분공간의 영역이다.
영어 원문 보기
Evaluate the triple integral ∭ExdV, where E is
the region in the first octant bounded by the parabolic cylinder y=x2
and the planes y+z=1, x=0, and z=0.
답 쓰고 채점
정답·풀이 보기
먼저 E 가 어떤 모양인지 파악해야 한다.
다음은 포물기둥 y=x2 (왼쪽)과
평면 y+z=1 (오른쪽)의 그림이다.
E 는 평면 y+z=1 로 포물기둥 y=x2 의 윗부분을
잘라 내어 만든 것이다. 그림은 다음과 같다.
First, we need to develop an understanding of what E looks like.
Here are sketches of the parabolic cylinder y=x2, on the left,
and the plane y+z=1, on the right.
E is constructed by using the plane y+z=1 to chop the top
off of the parabolic cylinder y=x2. Here is a sketch.
First, we need to develop an understanding of what E looks like.
Here are sketches of the plane x+y=1, on the left, and of the “tower”
bounded by the coordinate planes x=0, y=0, z=0 and the
plane x+y=1, on the right.
Now here is the parabolic cylinder z=y2 on the left.
E is constructed by using the parabolic cylinder z=y2 to chop the top
off of the tower x≥0, y≥0, z≥0, x+y≤1. The figure
on the right is a sketch.
(a) 방정식 z=1−x2 으로 주어진 곡면의 개형을 그리세요.
(b) E 를 평면 y=0, 기둥면 z=1−x2, 평면 y=z 로 둘러싸인 입체라 하자. 적분
∭Ef(x,y,z)dV
을 반복적분으로 나타내세요.
영어 원문 보기
(a) Sketch the surface given by the equation z=1−x2.
(b) Let E be the solid bounded by the plane y=0, the cylinder
z=1−x2, and the plane y=z. Set up the integral
∭Ef(x,y,z)dV
as an iterated integral.
정답·풀이 보기
(a)
z=1−x2 의 y 가 상수인 각 단면은 뒤집힌 포물선이다. 따라서 이 곡면은 뒤집힌 포물선을 나란히 쌓아 놓은 모양이다. 아래 왼쪽 그림은 이 곡면 중 y≥0 이고 z≥0 인 부분의 개형이다(두 조건은 모두 (b)에서 필요하다).
(b)
위 오른쪽 그림은 평면 y=z 의 개형이다. 이 평면은 곡면 z=1−x2 과 만나며, 그 교선은 아래 그림에서 파란 실선으로 그려진 비스듬한 포물선 모양의 곡선이다.
곡선 z=1−x2, z=y 위에서는 y=1−x2 임에 주목하자. 그러므로 입체 E 를 z축 위쪽 높은 곳에서 내려다보면 다음 영역이 보인다.
{(x,y)0≤y≤1−x2}
이 영역의 경계 y=1−x2 은 위 그림에서 xy평면 위의 파란 점선이다. 따라서
E={(x,y,z)−1≤x≤1,0≤y≤1−x2,y≤z≤1−x2}
이고 적분은 다음과 같다.
∭Ef(x,y,z)dV=∫−11dx∫01−x2dy∫y1−x2dzf(x,y,z)
원본 교재 풀이(영어)
(a)
Each constant y cross section of z=1−x2 is an upside
down parabola. So the surface is a bunch of upside down parabolas
stacked side by side. The figure on the left below is a sketch of
the part of the surface with y≥0
and z≥0 (both of which conditions will be required in part (b)).
(b)
The figure on the right above is a sketch of the plane y=z.
It intersects the surface z=1−x2 in the solid blue sloped parabolic
curve in the figure below.
Observe that, on the curve z=1−x2, z=y, we have
y=1−x2. So that when one looks at the solid E from high on the z–axis,
one sees
{(x,y)0≤y≤1−x2}
The y=1−x2 boundary of that region is the dashed blue line in the
xy–plane in the figure above. So
Express J as an integral where the integrations are to be performed
in the order x first, then y, then z.
정답·풀이 보기
적분 J에서
x는 0부터 1까지 변한다.
부등식으로 나타내면 0≤x≤1이다.
다음으로, 그 범위의 각 고정된 x에 대해 y는 0부터 x까지 변한다.
부등식으로 나타내면 0≤y≤x이다.
다음으로, 그 범위의 각 고정된 x와 y에 대해 z는 0부터 y까지 변한다.
부등식으로 나타내면 0≤z≤y이다.
이 부등식들은 다음과 같이 하나로 합칠 수 있다.
0≤z≤y≤x≤1(∗)
적분 순서를 바꾸어 z에 대한 적분이 가장 바깥, y에 대한 적분이 가운데, x에 대한 적분이 가장 안쪽에 오도록 하려 한다.
(∗)를 만족하는 가장 작은 z는 z=0이고
(∗)를 만족하는 가장 큰 z는 z=1이다(x=y=z=1일 때).
따라서 0≤z≤1이다.
다음으로, 그 범위의 각 고정된 z에 대해 (x,y)는
z≤y≤x≤1 범위를 움직인다. 특히 허용되는 가장 작은 y는 y=z이고
허용되는 가장 큰 y는 y=1이다(x=y=1일 때).
따라서 z≤y≤1이다.
다음으로, 그 범위의 각 고정된 y와 z에 대해 x는
y≤x≤1 범위를 움직인다.
따라서
J=∫01∫z1∫y1f(x,y,z)dxdydz
이다.
원본 교재 풀이(영어)
In the integral J,
x runs from 0 to 1.
In inequalities, 0≤x≤1.
Then, for each fixed x in that range, y runs from 0 to x.
In inequalities, 0≤y≤x.
Then, for each fixed x and y in those ranges, z runs from 0 to y.
In inequalities, 0≤z≤y.
These inequalties can be combined into
0≤z≤y≤x≤1(∗)
We wish to reverse the order of integration so that the z–integral
is on the outside, the y–integral is in the middle and the x–integral
is on the inside.
The smallest z compatible with (∗) is z=0
and the largest z compatible with (∗) is z=1 (when x=y=z=1).
So 0≤z≤1.
Then, for each fixed z in that range, (x,y) run over
z≤y≤x≤1. In particular, the smallest allowed y is y=z
and the largest allowed y is y=1 (when x=y=1).
So z≤y≤1.
Then, for each fixed y and z in those ranges, x runs over
y≤x≤1.
먼저 E 가 어떤 모양인지 파악해야 한다.
방정식 y=0, y=2, y+z=3, z=x2 은 모두 x→−x 에 대해 변하지 않는다. 따라서 E 는 x→−x 에 대해 변하지 않으며, 즉 yz평면에 대해 대칭이다. E 의 제1팔분공간(즉 x,y,z≥0) 부분을 그려 보자. x≤0, y≥0, z≥0 인 부분도 있다.
다음은 왼쪽에 평면 y=2, 가운데에 평면 y+z=3, 오른쪽에 좌표평면 x=0, y=0, z=0 과 평면 y=2, y+z=3 으로 둘러싸인 "터널"의 그림이다.
이제 왼쪽 그림은 포물기둥 z=x2 이다.
E 는 포물기둥 z=x2 으로 터널 x≥0, 0≤y≤2, z≥0, y+z≤3 의 앞부분을 잘라 내어 만든 것이다. 오른쪽 그림이 그 개략도이다.
따라서
E={(x,y,z)0≤y≤2,x2≤z≤3−y}
(a) E 에서
y 는 0 부터 2 까지 변한다.
그 범위의 각 고정된 y 에 대해 (x,z) 는
{(x,z)x2≤z≤3−y} 위를 움직인다.
특히 x2 의 최댓값은 3−y 이다(z=3−y 일 때).
따라서 x 는 −3−y 부터 3−y 까지 변한다.
First, we need to develop an understanding of what E looks like.
Note that all of the equations y=0, y=2, y+z=3 and z=x2
are invariant under x→−x. So E is invariant under
x→−x, i.e. is symmetric about the yz–plane. We'll sketch
the first octant (i.e. x,y,z≥0) part of E. There is also a
x≤0, y≥0, z≥0 part.
Here are sketches of the plane y=2, on the left,
the plane y+z=3 in the centre and of the “tunnel”
bounded by the coordinate planes x=0, y=0, z=0 and the
planes y=2, y+z=3, on the right.
Now here is the parabolic cylinder z=x2 on the left.
E is constructed by using the parabolic cylinder z=x2 to chop the front
off of the tunnel x≥0, 0≤y≤2, z≥0, y+z≤3. The figure
on the right is a sketch.
So
E={(x,y,z)0≤y≤2,x2≤z≤3−y}
(a) On E
y runs from 0 to 2.
For each fixed y in that range, (x,z) runs over
{(x,z)x2≤z≤3−y}.
In particular, the largest x2 is 3−y (when z=3−y).
So x runs from −3−y to 3−y.
For fixed y and x as above, z runs from x2 to 3−y.
The cylinder y2+z2=1 is centred on the x axis. The part of the cylinder
in the first octant intersects the plane z=0 in the line y=1,
intersects to plane y=0 in the line z=1 and intersects the plane
x=0 in the quarter circle y2+z2=1, x=0, y,z≥0. Here is a
sketch of E.
Viewed from above, the region
E is bounded by the lines x=0, y=0, x+y=2 and y=1. This base region
is pictured below.
To set up the domain of integration, let's decompose the base region into
horizontal strips as in the figure above. On the base region
y runs from 0 to 1 and
for each fixed y between 0 and 1, x runs from 0 to 2−y.
For each fixed (x,y) in the base region z runs from 0
to 1−y2
평면 x=1, y=1, z=1, x+y+z=2 로 둘러싸인 사면체를 D 라 할 때, ∭DxdV 의 값을 구하세요.
영어 원문 보기
Find ∭DxdV where D is the tetrahedron bounded
by the planes x=1, y=1, z=1, and x+y+z=2.
정답·풀이 보기
평면 x=1, y=1, z=1, x+y+z=2 와 영역 D 를 아래와 같이 그렸다.
그리고 평면들로 그림이 복잡해지지 않도록 D 만 그리면 다음과 같다.
D 에서
z 는 0 에서 1 까지 변하고,
0과 1 사이의 각 고정된 z 에 대해 (x,y) 는 x=1, y=1, x+y=2−z 로 둘러싸인 삼각형 Tz 위를 움직인다. z=0 일 때 이 삼각형은 한 점(사면체의 아래쪽 꼭짓점)임에 주목한다.
z 가 증가하면 삼각형이 커지고, z=1 일 때 크기가 최대가 된다.
Tz 의 그림은 다음과 같다.
적분 영역을 설정하기 위해, 각 0≤z≤1 에 대해 위 그림과 같이 Tz 를 세로 띠로 나눈다.
Tz 에서
The planes x=1, y=1, z=1, and x+y+z=2 and the region D are
sketched below.
And here is a sketch of D without the planes cluttering up the figure.
On D
z runs from 0 to 1 and
for each fixed z, between 0 and 1, (x,y) runs over the
triangle Tz bounded by x=1, y=1 and x+y=2−z. Observe that when z=0,
this triangle is just a point (the bottom vertex of the tetrahedron).
As z increases, the triangle grows, reaching its maximum size when z=1.
Here is a sketch of Tz.
In setting up the domain of integration, we'll decompose, for each
0≤z≤1, Tz into vertical strips as in the figure above.
On Tz
x runs from 1−z to 1 and
for each fixed x between 1−z and 1, y runs from 2−x−z to 1
(b) Here is a sketch of the side view of T, looking down the y axis.
We'll set up the limits of integration by using it as the base region.
We decompose the base region into vertical strips as in the figure above.
On the base region
x runs from 0 to 1 and
for each fixed x between 0 and 1, z runs from 0 to 1−x2.
In T, for each fixed (x,y) in the base region, y runs from 0 to
2−x−z.
E를 포물면 z=x2+y2 과 z=2−x2−y2 사이에서 유계이면서 원기둥 x2+y2≤1 안에 있는 영역이라 하자. 영역 E 위에서 f(x,y,z)=(x2+y2)3/2 의 적분을 구하세요.
영어 원문 보기
Let E be the region bounded between the parabolic surfaces
z=x2+y2 and z=2−x2−y2 and within the cylinder
x2+y2≤1. Calculate the integral of f(x,y,z)=(x2+y2)3/2 over the region E.
답 쓰고 채점
정답·풀이 보기
포물면 z=x2+y2 과 z=2−x2−y2 은 z=x2+y2=1 일 때 만난다.
원기둥좌표를 사용하자. 그러면 x2+y2=r2 이고,
dV=rdrdθdz 이며,
E 를 위로는 구면 x2+y2+z2=2, 아래로는 포물면 z=x2+y2 으로 둘러싸인 영역이라고 하자. E 의 무게중심을 구하세요.
영어 원문 보기
Let E be the region bounded above by the sphere x2+y2+z2=2 and below by the
paraboloid z=x2+y2. Find the centroid of E.
정답·풀이 보기
구면 x2+y2+z2=2 와 포물면 z=x2+y2 은 모두 z축을 중심으로 한 회전에 대해 불변임을 관찰하자. 따라서 E 는 z축을 중심으로 한 회전에 대해 불변이고, E 의 무게중심(질량중심)은 z축 위에 놓인다. 그러므로 xˉ=yˉ=0 이고 다음을 구하기만 하면 된다.
zˉ=∭EdV∭EzdV
곡면 z=x2+y2 과 x2+y2+z2=2 는 z=x2+y2 이고
z+z2=2⟺z2+z−2=0⟺(z+2)(z−1)=0
일 때 만난다. z=x2+y2≥0 이므로 두 곡면은 원 z=1, x2+y2=2 에서 만난다. 따라서
Observe that both the sphere x2+y2+z2=2
and the paraboloid z=x2+y2 are invariant under rotations
around the z–axis. So E is invariant under rotations around the
z–axis and the centroid (centre of mass) of E will lie on the
z–axis. Thus xˉ=yˉ=0 and we just have to find
zˉ=∭EdV∭EzdV
The surfaces z=x2+y2 and x2+y2+z2=2
intersect when z=x2+y2 and
z+z2=2⟺z2+z−2=0⟺(z+2)(z−1)=0
Since z=x2+y2≥0, the surfaces intersect on the circle z=1,
x2+y2=2. So
E={(x,y,z)x2+y2≤1,x2+y2≤z≤2−x2−y2}
Here is a sketch of the y=0 cross section of E.
Let's use cylindrical coordinates to do the two integrals.
In cylindrical coordinates
E={(rcosθ,rsinθ,z)0≤r≤1,0≤θ≤2π,r2≤z≤2−r2}, and
dV is rdrdθdz
so, for n=0,1 (we'll try to do both integrals at the same time)