유형·난이도는 우리말 풀이가 붙은 문제는 선생님이 정했고, 나머지는 자동 분류라 다를 수 있어요. 난이도가 정해지지 않은 문제는 난이도로 거를 때 빠집니다.
132문제 · 6 / 7쪽
101.CLP-3 · 3.6절 · 14번대학 수준우리말 번역
세 곡면 z=e−x2−y2, z=0, x2+y2=4 로 둘러싸인 유계인 입체를 생각하세요.
(a) 이 입체의 부피를 나타내는 삼중적분을 직교좌표계에서 세우세요(계산은 하지 마세요).
(b) 어떤 방법을 써도 좋으니 이 입체의 부피를 구하세요.
영어 원문 보기
Consider the finite solid bounded by the three surfaces:
z=e−x2−y2, z=0 and x2+y2=4.
(a) Set up (but do not evaluate) a triple integral in rectangular
coordinates that describes the volume of the solid.
(b) Calculate the volume of the solid using any method.
정답·풀이 보기
(a) 이 입체는 다음을 만족하는 모든 (x,y,z) 로 이루어져 있다.
(x,y) 는 원판 x2+y2≤4 위를 움직이고,
x2+y2≤4 를 만족하는 각각의 고정된 (x,y) 에 대해 z 는 0 에서 e−x2−y2 까지 움직인다.
원판 x2+y2≤4 에서
x 는 −2 에서 2 까지 움직이고,
−2≤x≤2 를 만족하는 각각의 고정된 x 에 대해 y 는 −4−x2 에서 4−x2 까지 움직인다.
The solid consists of the set of all points (x,y,z) such
that x2+y2≤4 and 0≤z≤2y. In particular y≥0.
When we look at the solid from above, we see all (x,y) with
x2+y2≤4 and y≥0. This is sketched in the figure on the left
below.
We'll use cylindrical coordinates. In the base region (the shaded region
in the figure on the left above)
θ runs from 0 to π and
for each fixed θ between 0 and π, r runs from 0 to 2.
For each fixed point (x,y)=(rcosθ,rsinθ) in the base
region, z runs from 0) to 2y=2rsinθ.
(a) (1,0,−1) 에서 수소의 밀도가 가장 빠르게 증가하는 방향은 어느 쪽인지 구하세요.
(b) 당신은 원점에 있는 우주선에 타고 있습니다. 이 우주선이 ⟨0,0,1⟩ 방향으로 날아간다고 하세요. 우주선에는 수소를 모으기 위해, 우주선을 중심으로 하고 진행 방향에 수직으로 펼쳐진 반지름 1 인 원판이 달려 있습니다. 우주선이 거리 2 만큼 이동했을 때까지 모은 수소의 양을 구하세요.
∫02πcos2θdθ=π 임을 이용해도 됩니다.
영어 원문 보기
The density of hydrogen gas in a region of space is given by the formula
ρ(x,y,z)=1+x2+y2z+2x2
(a) At (1,0,−1), in which direction is the density of hydrogen increasing
most rapidly?
(b) You are in a spacecraft at the origin. Suppose the spacecraft flies
in the direction of ⟨0,0,1⟩. It has a disc of radius 1,
centred on the spacecraft and deployed perpendicular to the direction
of travel, to catch hydrogen. How much hydrogen has been collected
by the time that the spacecraft has traveled a distance 2?
Since the spherical coordinate φ(x,y,z) of a point (x,y,z) is
the angle between the positive z-axis and the radius vector from
(0,0,0) to (x,y,z), the sets
구면좌표 ρ 는 원점 (0,0,0) 에서 그 점까지의 거리이다.
특히 ρ=0 이면 θ 와 φ 의 값에 관계없이 그 점은 원점이다. ρ=1 이면 그 점은 원점을 중심으로 하는 반지름 1 인 구 위에 있다.
구면좌표 φ 는 양의 z축과 원점에서 (x,y,z) 까지의 선분 사이의 각이다.
특히 φ=0 인 모든 점은 θ 의 값에 관계없이 양의 z축 위에 있다. φ=2π 인 모든 점은 xy평면 위에 있다.
원본 교재 풀이(영어)
The sketch is below. To help build up this sketch, it is useful to
recall the following facts.
The spherical coordinate ρ is the distance of the point from the
origin (0,0,0).
In particular if ρ=0, then the point is the origin (regardless of the values of θ and φ). If ρ=1 then the point lies on the
sphere of radius 1 centred on the origin.
The spherical coordinate φ is the angle between the positive z-axis
and the radial line segment from the origin to (x,y,z).
In particular, all points with φ=0 lie on the positive z–axis
(regardless of the value of θ). All points with φ=2π
lie in the xy-plane.
z2=3x2+3y2⟺ρ2cos2φ=3ρ2sin2φcos2θ+3ρ2sin2φsin2θ=3ρ2sin2φ⟺tan2φ=31⟺tanφ=±31⟺φ=6π or 65π
The surface z2=3x2+3y2 is a cone. The upper half of the cone,
i.e. the part with z≥0, is φ=6π.
The lower half of the cone,
i.e. the part with z≤0, is φ=π−6π=65π.
(a) 3차원에서 E 의 그림을 상당히 정확하게 그리세요.
좌표축에 단위를 반드시 표시하세요.
(b) E 의 부피를 구하세요.
영어 원문 보기
Consider the region E in 3–dimensions specified by the
spherical inequalities
1≤ρ≤1+cosφ
(a) Draw a reasonably accurate picture of E in 3–dimensions.
Be sure to show the units on the coordinates axes.
(b) Find the volume of E.
정답·풀이 보기
(a)
먼저 E 의 두 경계 ρ=1 과 ρ=1+cosφ 는 모두 구면좌표 θ 와 무관하다. 따라서 E 는 z축을 중심으로 한 회전에 대해 변하지 않는다.
E 를 그리기 위해
먼저 θ=0 인 E 의 경계 부분(즉 xz평면에서 x>0 인 반쪽)을 그린 다음,
z축을 중심으로 회전한다.
θ=0 인 E 의 경계 부분(즉 반평면 y=0, x≥0 위)은 두 곡선으로 이루어진다.
ρ=1+cosφ, θ=0:
φ=0 (즉 양의 z축 위)일 때
cosφ=1 이므로 ρ=2 이다. 따라서 이 곡선은
(0,0,2) 에서 시작한다.
φ 가 증가하면 cosφ 가 감소하므로 ρ 도
감소한다.
φ 가 2π (즉 xy평면 위)일 때
cosφ=0 이므로 ρ=1 이다.
2π<φ≤π 일 때 cosφ<0 이므로
ρ<1 이다. E 의 모든 점은 ρ≥1 을 만족해야 하므로
경계의 이 부분은 xy평면 위의 점 (1,0,0) 에서 끝난다.
곡선 ρ=1+cosφ, θ=0, 0≤φ≤2π
은 아래 왼쪽 그림에 그려져 있다. 이것은 (0,0,2) 에서
(1,0,0) 까지의 바깥쪽 곡선이다.
ρ=1, θ=0:
곡면 ρ=1 은 원점을 중심으로 하는 반지름 1 인 구이다.
위에서 살펴본 대로 조건 1≤ρ≤1+cosφ 에서
0≤φ≤2π, 즉 z≥0 이어야 한다.
구 ρ=1 은 사분평면 y=0, x≥0, z≥0 과
원점을 중심으로 하는 사분원에서 만나며, 이 사분원은 z축 위의 (0,0,1) 에서 시작하여
xy평면 위의 (1,0,0) 에서 끝난다.
곡선 ρ=1, θ=0, 0≤φ≤2π
은 아래 왼쪽 그림에 그려져 있다. 이것은 (0,0,1) 에서
(1,0,0) 까지의 안쪽 곡선이다.
E 를 얻으려면 아래 왼쪽 그림의 색칠한 영역을
z축을 중심으로 회전한다. 제1팔분공간에 있는 E 의 부분은
아래 오른쪽 그림에 그려져 있다. xz평면(x≥0)에 있는 E 의 부분은 연하게 색칠되어 있고,
yz평면(y≥0)에 있는 E 의 부분은 조금 더 진하게 색칠되어 있다.
(b) E 에서
φ 는 0 (즉 양의 z축)에서 2π
(즉 xy평면)까지 변한다.
그 범위의 각 φ 에 대해 ρ 는 1 에서
1+cosφ 까지, θ 는 0 에서 2π 까지 변한다.
(a)
First observe that both boundaries of E, namely ρ=1 and
ρ=1+cosφ, are independent of the spherical coordinate
θ. So E is invariant under rotations about the z–axis.
To sketch E we
first sketch the part of the boundary of E with θ=0
(i.e. in the half of the xz–plane with x>0), and then
rotate about the z–axis.
The part of the boundary of E with θ=0 (i.e.
in the half–plane y=0, x≥0), consists of two curves.
ρ=1+cosφ, θ=0:
When φ=0 (i.e. on the positive z–axis),
We have cosφ=1 and hence ρ=2. So this curve starts
at (0,0,2).
As φ increases cosφ, and hence ρ,
decreases.
When φ is 2π (i.e. in the xy–plane),
we have cosφ=0 and hence ρ=1.
When 2π<φ≤π, we have cosφ<0 and hence
ρ<1. All points in E are required to obey ρ≥1. So
this part of the boundary stops at the point (1,0,0) in the xy–plane.
The curve ρ=1+cosφ, θ=0, 0≤φ≤2π
is sketched in the figure on the left below. It is the outer curve from
(0,0,2) to (1,0,0).
ρ=1, θ=0:
The surface ρ=1 is the sphere of radius 1 centred on the origin.
As we observed above, the conditions 1≤ρ≤1+cosφ
force 0≤φ≤2π, i.e. z≥0.
The sphere ρ=1 intersects the quarter plane y=0, x≥0, z≥0,
in the quarter circle centred on the origin that starts at (0,0,1)
on the z–axis and ends at (1,0,0) in the xy–plane.
The curve ρ=1, θ=0, 0≤φ≤2π
is sketched in the figure on the left below. It is the inner curve from
(0,0,1) to (1,0,0).
To get E, rotate the shaded region in the figure on the left below
about the z-axis. The part of E in the first octant is sketched
in the figure on the right below. The part of E in the xz–plane
(with x≥0) is lightly shaded and the part of E in the yz–plane
(with y≥0) is shaded a little more darkly.
(b) In E
φ runs from 0 (i.e. the positive z–axis) to 2π
(i.e. the xy–plane).
For each φ in that range ρ runs from 1 to
1+cosφ and θ runs from 0 to 2π.
(a) 원뿔 z=x2+y2 의 안쪽이면서 구
x2+y2+z2=a2 의 안쪽인 부분의 부피.
(b) 제1팔분공간에 놓인 반지름이 a 인 구의 부분 R 에서
∭RxdV 와 ∭RzdV 의 값.
(c) 반지름이 a 인 구형 행성의 질량. 단, 중심으로부터 거리 ρ 인 곳의 밀도는 δ=A/(B+ρ2) 이다.
(d) ρ=a(1−cosφ) 로 둘러싸인 부분의 부피. 여기서 ρ 와 φ 는 일반적인 구면좌표를 가리킨다.
영어 원문 보기
Use spherical coordinates to find
(a) The volume inside the cone z=x2+y2 and inside the sphere
x2+y2+z2=a2.
(b) ∭RxdV and ∭RzdV over the
part of the sphere of radius a that lies in the first octant.
(c) The mass of a spherical planet of radius a whose density at
distance ρ from the center is δ=A/(B+ρ2).
(d) The volume enclosed by ρ=a(1−cosφ). Here ρ and φ
refer to the usual spherical coordinates.
mass=∫0adρρ2∫0πdφsinφ∫02πdθB+ρ2Adensity=2πA{∫0πdφsinφ}{∫0adρB+ρ2ρ2}=4πA∫0adρ(1−B+ρ2B)=4πAa−4πAB∫0a/Bds1+s21 where ρ=Bs, dρ=Bds=4πA(a−Btan−1Ba)
(d) Observe that
when φ=0 (i.e. on the positive z–axis), cosφ=1 so that
ρ=a(1−cosφ)=0 and
as φ increases from 0 to 2π, cosφ decreases
so that ρ=a(1−cosφ) increases and
when φ=2π (i.e. on the xy–plane), cosφ=0 so that
ρ=a(1−cosφ)=a and
as φ increases from 2π to π, cosφ
continues to decrease so that
ρ=a(1−cosφ) increases still more and
when φ=π (i.e. on the negative z–axis), cosφ=−1 so that
ρ=a(1−cosφ)=2a
So we have the following sketch of the intersection of the specified
volume with the right half of the yz–plane.
The volume in question is invariant under rotations about
the z–axis so that
Volume=∫02πdθ∫0πdφsinφ∫0a(1−cosφ)dρρ2=2π3a3∫0πdφsinφ(1−cosφ)3=2π3a3∫02dtt3 where t=1−cosφ, dt=sinφdφ=2π3a3424=38πa3
For each fixed x in that range, y runs from −1−x2 to
1−x2. In inequalities, that is −1−x2≤y≤1−x2,
which is equivalent to x2+y2≤1.
For each fixed (x,y) obeying x2+y2≤1, z runs from
1−1−x2−y2 to 1+1−x2−y2.
In inequalities, that is 1−1−x2−y2≤z≤1+1−x2−y2,
which is equivalent to x2+y2+(z−1)2≤1.
So the domain of integration is
V={(x,y,z)x2+y2+(z−1)2≤1}
In spherical coordinates, the condition x2+y2+(z−1)2≤1 is
Note that V is contained in the upper half, z≥0, of R3
and that the xy–plane in tangent to V. So as (x,y,z) runs over V,
the spherical coordinate φ runs from 0 (the positive z–axis)
to π/2 (the xy–plane). Here is a sketch of the side view
of V.
As dV=ρ2sinφdρdφdθ
and (x2+y2+z2)5/2=ρ5, the integral is
The top of the cylinder has equation z=h, i.e. ρcosφ=h.
The side of the cylinder has equation x2+y2=a2, i.e. ρsinφ=a.
The bottom of the cylinder has equation z=0, i.e. φ=2π.
For each fixed φ, θ runs from 0 to 2π and ρ
runs from 0
to either cosφh (at the top of the can,
if φ<tan−1ha)
or sinφa (at the side of the can, if φ>tan−1ha). So the
Volume=∫0tan−1hadφ∫02πdθ∫0h/cosφdρρ2sinφ+∫tan−1ha2πdφ∫02πdθ∫0a/sinφdρρ2sinφ=2π∫0tan−1hadφ3cos3φh3sinφ+2π∫tan−1ha2πdφ3sin3φa3sinφ=2π{∫0hadt3h3t−∫ah0ds3a3} where t=tanφ, dt=sec2φdφ, s=cotφ, ds=−csc2φdφ=2π{3h321(ha)2+3a3ah}=2π{6ah2+3a2h}=πa2h
(a) ∭ΩzdV 의 값을 구하세요. 여기서 Ω 는
제1팔분공간 x≥0, y≥0,
z≥0 에 있으면서 구 x2+y2+z2=1 의 내부를 차지하는 3차원 영역입니다.
(b) (a)의 결과를 이용하여 z≥0, x2+y2+z2≤1 로 주어진 반구 모양 입체의 무게중심을 빠르게 구하세요.
영어 원문 보기
(a) Evaluate ∭ΩzdV where Ω
is the three dimensional region in the first octant x≥0, y≥0,
z≥0, occupying the inside of the sphere x2+y2+z2=1.
(b) Use the result in part (a) to quickly determine the centroid
of a hemispherical ball given by z≥0, x2+y2+z2≤1.
원점을 중심으로 하는 반지름이 2인 공의 윗부분 절반을 생각하세요. 이 공의 밀도는 단위 부피당 질량이 9z 인 변수 밀도라고 하세요.
(a) 이 반구의 질량을 나타내는 삼중적분을 세우세요.
(b) 이 질량 중 원뿔
z=x2+y2
안쪽에 있는 부분이 차지하는 분수를 구하세요.
영어 원문 보기
Consider the top half of a ball of radius 2 centred at the
origin. Suppose that the ball has variable density equal to 9z units
of mass per unit volume.
(a) Set up a triple integral giving the mass of this half–ball.
(b) Find out what fraction of that mass lies inside the cone
z=x2+y2
정답·풀이 보기
(a) 구면좌표계에서
x=ρsinϕcosθy=ρsinϕsinθz=ρcosϕ
이므로 구 x2+y2+z2=4 는 ρ2=4 즉 ρ=2 이고, xy평면은 ϕ=2π 이다. 따라서